Panasonic DPC322 Operating Instructions Manual

Also see for Workio DP-C262: Operating instructions Brochure & specs Scanner guide Facsimile guide Software guide

Appendix100Declaration of Conformity (DoC)Panasonic Communications Co., Ltd. declares that this G3 Facsimile equipment is in compliance with the essentialrequirements and other relevant provisions of Directive 1999/5/EC.If you want to get a copy of the original Declaration of Conformity of our products which relates to Directive 1999/5/EC,please contact to our web address: http://www.doc.panasonic.deContact:Panasonic Services Europe GmbHPanasonic Testing CentreWinsbergring 15, 22525 Hamburg, F.R. GermanyNetwork CompatibilityThis product, Model DP-C322/C262-** (** means country suffixes as table below), is designed as to work with an analoguePublic Switched Telephone Network (PSTN) in the each country.WARNING! denotes a potential hazard that could result in serious injury or death.• Plug power supply cord into ordinary AC outlet before connecting telephone line cord. Disconnect telephone line cordbefore unplugging power supply cord from AC outlet.• Disconnect the equipment immediately should it ever suffer physical damage which results in the internal partsbecoming accessible in normal use. In this instance users should have the equipment repaired or dispose of.• If the power supply cord and/or telephone line cord of this equipment are damaged, they must be replaced by thespecial cords supplied by an authorized Panasonic service centre.CAUTION! denotes hazards that could result in minor injury or damage to the machine.• When you know that a thunderstorm is coming, we recommend that you;1. Unplug the telephone line cord from the phone jack.2. Turn off the power and unplug the power supply cord from AC outlet.• This equipment may not necessarily provide for the effective hand-over of a call to or from a telephone connectedto the same line.• The operation of this equipment on the same line as telephones or other equipment with audible warning devices orautomatic ring detectors will give rise to bell tinkle or noise and may cause false tripping of the ring detector. Shouldsuch problem occur, the user is not to contact telecom (telephone company) faults service.Regulatory Information** Country ** Country ** CountryEB U.K./Ireland EH The Netherlands EE ItalyAG Germany EP Spain EP GreeceAV France ER Turkey