Panasonic DPC322 Operating Instructions Manual

Also see for Workio DP-C262: Operating instructions Brochure & specs Scanner guide Facsimile guide Software guide

Appendix98SpecificationsPaper Type● Commercial papers described below are acceptable, however, the standard paper (HammermillLaser Print) is recommended for optimum copy quality and performance of the machine.Paper Type Paper Weight Tray 1 - 4 Sheet Bypass 2-Sided Copy/PrintThin 55-63 g/m2 Not Compatible Compatible Not CompatiblePlain 64-105 g/m 2 Compatible Compatible CompatibleGlossy 64-105 g/m2 Compatible Compatible CompatibleRecycled 64-105 g/m2 Compatible Compatible CompatibleThick 106-169 g/m2 Not Compatible Compatible Not CompatibleCoated 106-169 g/m2 Not Compatible Compatible Not CompatibleIndex / Cover 170-220 g/m2 Not Compatible Compatible Not CompatibleCoated/Cover 170-220 g/m2 Not Compatible Compatible Not CompatibleSpecial∗ Not Compatible Compatible Not Compatible∗ Special Purpose PaperLabels : FP-111LEnvelopes : Commercial #10 (241.3 mm x 104.8 mm), Monarch 7 3/4 (190.5 mm x 98.4 mm),DL (220 mm x 110 mm), C5 (229 mm x 162 mm)Transparency : CG3700 3M● The following paper type limitations correspond to the tray used.Paper Type Inner Tray Outer Tray DA-FS320 DA-FS325Index / Cover Compatible Compatible Not Compatible Non-Sort onlyCoated Compatible Compatible Not Compatible Non-Sort onlyLabels Compatible Compatible Not Compatible Non-Sort onlyEnvelopes Compatible Compatible Not Compatible Not CompatibleTransparency Compatible Compatible Non-Sort only Non-Sort only● Do not use the following type/flawed paper to avoid image quality related problems, mechanicalfailures or misfeeding problems.Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.Tracing paper, Pressure-sensitive paper, Transparency with white border,Special paper for ink-jet printer, Thermal recording paper, Thermal transfer paper, Photo paper,Light paper (up to 55 g/m 2), Curled paper, Adhesive paper/envelope, Wet paper/envelope,Textured paper, Stapled paper, Copied/Printed paper produced by other machine.● Load the paper with the printing side Face Down in a Portrait Orientation.Envelope(Only for printing) Face Down.Flap to the right.OHP film / LabelsFace DownorSheet Bypass Sheet Bypass• Certain types of envelopes may get wrinkled.● Ensure to change the media type selection in the control panel when changing the media loadedon the trays. (Ex: Select "Transparency" when Transparencies are loaded in the Sheet Bypass)