I Audio settingsfiiSpeaker SettingChoose the settings to suit your speakersystem,• Speaker modeChoose the size of your speakers andwhether they are connected or not. If youset a speaker as being not present, soundwill not be output from that speaker even ifit is connected,• Delay timeChange these settings to make up fordifferences in the distances between thespeakers and the listening position.• TestUse this test to adjust the volume balanceof your speakers.Speaker settings screenSpeaker mode(Front L) Speaker mode(Center)Speakermode(Front R)Delay time Channel balance(Center)Speakermode(Subwoofer)Channelbalance(Subwoofer)Speaker mode Speaker mode(Surround L) (Surround R)Channel balance Channel balance(Surround L) (Surround R)Delay time(Surround L/R)Jo-o O-OACTIONRETURNCiWhile stopped, pressACTION [ACTION].82 Ratings Level 8 =_I;_ 3 Menu t_nguage E ngJish_1_ 4 On Screen Messages5 FL DiSplay Bright_. 6 TV Aspect 4:370igi_al Audio Output8 speaker Se_ng Mu_haneel9 Other _ttingsPress RETURN 10 exitInitial settings screenItem Speaker modeContentUnderlined values are factory settings."Large" speakers are capable of reproducing sounds below100 Hz. "Small" speakers are other types.Front speakers (L/R) Example (LS):L_SmallCenter speakerLarae/SmalVNo • LargeSubwooferY_./No '_Surround speakers (LSIRS)L_L_L_/SmalI/No• Small8• • • Nobo_speakers toIf you set the subwoofer to "No", set"Large".I_FJ'FJIWhen playing DVD-AOdio, the software settings may override anysettings you change here. "P.PCM" appears or "D.MIX" disappearson the main unit."2-charmer'Select if you have connected the unit to other equipment with astereo connection cable through the front left and dght terminals ofthe 5.1-channel connection terminals. You will return to the initialsettings menu when you press [ENTER]•VQT8354