Panasonic DVD-F65GCS Service Manual

Item Player mode and buttoncombinationDisplayChecking DVD, CD laser usagetime(Timer 1 data)In STOP mode, press PAUSE andFWD-SKIP buttons on the player,and “5” button on the remotecontrol unit.T1_xxxx_yyyy / xxxx(DVD), yyyy(total time is displayed with adigit number by the ten hours.You may have to press “FL-SELECT”on remote control to veiw remainingtext due to FL display not abledisplay full length.Checking spindle motor usagetime(Timer 2 data)In STOP mode, press PAUSE andFWD-SKIP buttons on the player,and “6” button on the remotecontrol unit.T2_xxxx / xxxx: total time isdisplayed with a four-digit numberthe ten hours.You may have to press “FL-SELECT”on remote control to veiw remainingtext due to FL display not abledisplay full length.Resetting DVD, CD laser usagetimeWhile displaying Timer 1 data,press STOP and FWD-SKIPbuttons on the player, and “5”button on the remote control unitT1_0000_0000You may have to press “FL-SELECT”on remote control to veiw remainingtext due to FL display not abledisplay full length.Resetting spindle motor usagetimeWhile displaying Timer 2 data,press STOP and FWD-SKIPbuttons on the player and “6”button on the remote control unit.T2_0000You may have to press “FL-SELECT”on remote control to veiw remainingtext due to FL display not abledisplay full length.8.2.1. Cautions to be taken during replacement of optical pickupOptical pickup could be damaged due to the static electricity discharged from human body.Wear proper protection gear against static electricity during optical pickup and its peripheralrepair. (Refer to “Cautions to Be Taken When Handling Optical Pickup”.)- Do not touch laser diode, actuator and their peripherals.- Do not check laser diode with a tester and such. (The tester will bedestroyed.)- For short-circuiting or removing laser diode, the use of an anti-static soldering iron is recommended. (Recommended model:HAKKO ESD product)- Solder the land of the flexible cable in the optical pickup.Note:If an anti-static soldering iron is not available, short-circuit the terminal surface of the flexiblecable and then the land using a clip or equivalent device.11