Panasonic DVD-RP82 Operating Instructions Manual

RQT6549Basic operations11Replaying a scene—QUICK REPLAY[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]Skip back a few seconds within the current item (program, track or title).During playPress [QUICK REPLAY].[Note]This feature may not work while playing some parts of a disc or at all withsome discs.Starting play from a selected item[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]Press the numbered buttons to select the item.To select a 2-digit numbere.g. 23: [S10] ➡ [2] ➡ [3].[WMA] [MP3]Press [ENTER] after pressing the numbered buttons. (You do not have topress [S10].)Play starts from the selected item.[Note]≥This works only when stopped with some discs.≥When playing DVD-Audio and you want to start play from a track in adifferent group, select the group first (➡ page 12).Setting the unit to turn off—SLEEP timer[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]Press [SLEEP] to select the setting.Each time you press the button:OFF #AUTO§#60 min #90 min #120 min^————————————————}§The unit turns off 5 minutes after playfinishes.To cancel the SLEEP timerPress [SLEEP] to select “OFF”.To confirm the remaining timePress [SLEEP].[Note]≥AUTO also works with DVDs that show a menu after play finishes.≥AUTO does not work if you press [∫], [MENU] or [TOP MENU]. It isactivated again when you restart play.≥AUTO does not work correctly with some discs (e.g., if menus appearafter playing Video CDs).∫ Auto standbyThe unit switches to standby mode after about 30 minutes in the stopmode, irrespective of the SLEEP setting.D.MIX C DBMPGRMTRTTLGRP TRCK CHAP D.N.R.DVD- A V R CDWMAMP3 A.ONLYPROG. SLEEPA B RNDPGMAPress PLAY to Chapter ReviewPress PLAY to Preview ChaptersThe unit turns off after60 minutes.60 minZZD.MIX C DBMPGRMTRTTLGRP TRCK CHAP D.N.R.DVD- A V R CDWMAMP3 A.ONLYPROG. SLEEPA B RNDPGMAPosition memorizedLight as you memorize positions.Resume function[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3](When the elapsed play time is displayed)The position you stopped play at is recorded by the unit when “!” isflashing on the display.While “!” is flashing, press [1] (PLAY) to start play from where youstopped it. (When playing DVD-Video ➡ Chapter Preview below)≥The position is cleared when the disc tray is opened or the unit isswitched to standby.To clear the positionPress [∫] before recalling the memorized position.Position Memory functionThis function allows you to memorize a position to start from even afterswitching the unit to standby or changing discs. You can memorizepositions on up to five different discs at a time. When you memorizeanother position, the earliest position is replaced.≥This function does not work while playing some DVDs or play lists onDVD-RAM.1. During play, press [POSITION MEMORY].2. Press [POWER Í] to switch the unit to standby or press [<] to removethe disc.3. When you are ready to play the disc again, press [1] (PLAY).Play starts from the memorized position and the position is cleared.(When playing DVD-Video ➡ Chapter Preview below)To clear the positionPress [∫] before recalling the memorized position.Chapter Preview [DVD-V]One of these messages appears immediately after you press [1] (PLAY).Press [1] (PLAY) while the message is displayed and the beginningportions of each chapter up to the current one are played. Full playresumes from the point where you pressed [∫] or [POSITION MEMORY].(This feature works only within a title.)If you do not press [1] (PLAY), the message disappears and play startsfrom where you pressed [∫] or [POSITION MEMORY].[WMA] : for U.S.A. and Canada only