Panasonic DVD-RP82 Operating Instructions Manual

7RQT6549Getting startedDIGITAL AUDIO OUT(PCM/BITSTREAM)AUDIO OUTVIDEOOUT S VIDEOOUTCOMPONENT VIDEO OUT(480P/480I)OPTICALLCENTER YRLRLRSUB-WOOFER SURROUND FRONTP BP R5 . 1 c h 2 c hCOAXIALCENTER SUB-WOOFERSURROUND(L) (R)FRONT(L) (R)OPTICALCOAXIALCENTER LRLRSUB-WOOFER SURROUND FRONTOPTICALCOAXIALorHome Theater—Enjoying more powerful soundªB Analog connectionªA Digital connectionCoaxial cable Optical digital audio cableDo not bend sharply whenconnecting.Change “Digital output”(➡ page 23).Change “Speaker setting”(➡ page 23).AmplifierSpeakers (example)Connect three or more speakers for surround sound.[Note]≥If you don’t connect a subwoofer, it is advisable to connect front speakers(L/R) capable of producing bass of less than 100 Hz.≥You cannot use DTS Digital Surround decoders not suited to DVD-Video.∫ Recording≥Digital recording (➡ Connection [A] above)You can record the digital signal directly to digital recording equipment.[Note]≥With DVD, the following conditions must be met: a the disc doesn’thave protection preventing digital recording, and b the recordingequipment can handle signals with a sampling frequency of 48 kHz.≥You cannot record WMA/MP3.When recording DVDs, make the following settings.– ADVANCED SURROUND: OFF (➡ page 16)– Digital Audio Output: On (RE-MASTER Off) (➡ page 21)– PCM Down Conversion: YesDolby Digital/DTS Digital Surround/MPEG§: PCM(➡ page 23)§MPEG: for Australia and N.Z. only≥Analog recording (➡ Connection [B] above)You can record to a cassette deck or other recording equipment.There are no limitations on recording analog signals as there are withdigital signals.Insert fully,with this sidefacing up.You can connect to adigital amplifier or systemcomponent to enjoy stereoor Dolby Pro Logic.Connect cablesto terminalscorresponding tothe speakers youhave connected.Enjoy the powerful movie theater and hall-like sound available with multiple channel audio found on DVDs by connecting an amplifier and speakers.There are two types of connection, digital and analog.[Note]≥The equipment connections described are examples.≥Peripheral equipment and optional cables sold separatelyunless otherwise indicated.≥Before connection, turn off all equipment and read theappropriate operating instructions.[A] Digital—Connect an amplifier with Dolby Digital and DTS decoders toenjoy surround sound.You can also enjoy high-quality stereo sound with samplingfrequencies of 88.2 and 96 kHz if the material isn’t copy-protected andthe equipment you connect is compatible with these signals.[B] Analog—Connect an amplifier with multi-channel audio input terminalsto enjoy surround sound.This unit can decode Dolby Digital and DTS and there are no limitationson sampling frequency with this kind of connection.