Panasonic DVD-S33 Operating Instructions Manual

Contents

16 RQTC0118Changing the player settings≥ The settings remain intact even if you switch the unit to standby.≥ Underlined items are the factory preset.≥ The QUICK SETUP enables successive settings of the items in the shaded area.∫ “DISC” menu ∫ “VIDEO” menu1 2 3 4 5Shows setup menu. Select the menu. Select the item. Make the settings. Press to exit.SETUP ENTERSelectRegisterSelectRegisterENTER1 2 34 5 67 8 90 10SelectRegisterENTERSETUPSETTING STATE Display the current setting of the items belowAUDIOChoose the audiolanguage.ENGLISH (LANGUAGE OPTIONS)§1 ORIGINAL§2OTHER----§3SUBTITLEChoose the subtitlelanguage.AUTO§4 ENGLISH (LANGUAGE OPTIONS)§1OTHER----§3MENUSChoose the languagefor disc menus.ENGLISH (LANGUAGE OPTIONS)§1 OTHER----§3RATINGSSet a ratings level tolimit DVD-Video play.Setting ratings (When level 8 is selected)0 LOCK ALL: To prevent play of discs without ratings levels.1 to 7: To prohibit play of DVD-Video withcorresponding ratings recorded on them.8 NO LIMIT: To play all discs.When setting a ratings level, a password screen is shown.Follow the on-screen instructions.Do not forget your password.A message screen will be shown if a DVD-Video exceedingthe ratings level is inserted in the unit. Follow the on-screeninstructions.PASSWORDChange thepassword for“RATINGS”(➜ above).1 Select “CHANGE” and press [ENTER].2 Enter the current password with the numbered buttons,then press [ENTER].3 Enter the new password with the numbered buttons, thenpress [ENTER].4 When “VERIFY” is displayed, please verify the passwordand input it again.SETTING STATE Display the current setting of the items belowTV ASPECTChoose the setting to suit yourtelevision and preference.4:3PAN&SCAN 4:3LETTERBOX4:3ZOOM 16:9NORMAL16:9SHRINK 16:9ZOOMTV TYPESelect to suit the type oftelevision.STANDARD CRTLCD PROJECTIONPLASMANTSC DISC OUTChoose PAL60 or NTSC outputwhen playing NTSC discs.NTSC: Output signals from NTSC discs remainas NTSC.PAL60: NTSC disc can be viewed on PALtelevision.[Asia]: “NTSC” is the factory preset.STILL MODESpecify the type of pictureshown when paused.AUTOFIELD: The picture is not blurred, but picturequality is lower.FRAME: Overall quality is high, but the picturemay appear blurred.VIDEO OUT-SCART§5Choose the video signal formatto be output from the SCART andCOMPONENT VIDEO OUTterminals (➜ 6)VIDEO/YPbPrS-VIDEO/YPbPrRGB/NO OUTPUTVIDEO OUT (I/P)Select “PROGRESSIVE” only ifconnecting to a progressiveoutput compatible television.INTERLACEPROGRESSIVEWhen you select “PROGRESSIVE”, a messagescreen will appear.≥ For progressive output, press [3] and then press[ENTER].≥ Press [RETURN] to cancel.Changing the player settings