Panasonic DVD-S33 Operating Instructions Manual

Contents

7RQTC0118∫ Enjoying multi-channel surround sound≥ You cannot use DTS Digital Surround decoders not suited to DVD.∫ Connect the AC mains lead lastChange “PCM OUTPUT”, “DOLBY DIGITAL”, “DTS” and “MPEG§” (➜ 17, “AUDIO”menu).§ [Except\Asia][For\the\United\Kingdom,\Republic\of\Ireland,\and\the\Middle\East,\except\United\Arab\Emirates][only]BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 2 BEFORECONNECTION.COAXIAL INAmplifier with a built-indecoder or a decoder-amplifier combinationCoaxial cableBack of the unitAC mains leadTo household mains socketSTEP 2 The remote controlPreparationTurn on the television and select the appropriate video input on the television.1 Press [Í] .2 Press [SETUP].QUICK SETUP screen appears.3 Follow the on-screen instructions and select the settings with [3 4]and [ENTER].≥ Press [RETURN] to return to previous screen.4 Press [ENTER] to finish setting.5 Press [SETUP] to exit the setup menu.≥ To change these settings later, select “QUICK SETUP” (➜ 17, “OTHERS” menu).∫ Batteries ≥ Insert so the poles (i and j) match those in theremote control.≥ Do not use rechargeable type batteries.Do not:≥ mix old and new batteries.≥ use different types at the same time.≥ heat or expose to flame.≥ take apart or short circuit.≥ attempt to recharge alkaline or manganesebatteries.≥ use batteries if the covering has been peeled off.Mishandling of batteries can cause electrolyte leakage which can damage items thefluid contacts and may cause a fire.Remove if the remote control is not going to be used for a long period of time. Storein a cool, dark place.∫ UseAim at the remote control sensor (➜ 8), avoiding obstacles, at a maximum range of7 m directly in front of the unit.STEP 3 Quick setupR6/LR6, AASTEP 1 Connection/ STEP 2 The remote control /STEP 3 Quick setup