Panasonic Diga DMR-E65 Operating Instructions Manual

Also see for Diga DMR-E65: Operating instructions Operating instructions

Contents

11RQT7450Getting startedYou can configure the remote control TV operation buttons to turnthe television on/off, change the television input mode, select thetelevision channel and change the television volume.Point the remote control at the televisionWhile pressing [Í TV], enter the codewith the numbered buttons.Manufacturer and Code No.Test by turning on the television and changing channels. Repeatthe procedure until you find the code that allows correct operation.≥If your television brand is not listed or if the code listed for yourtelevision does not allow control of your television, this remotecontrol is not compatible with your television.If other Panasonic products are placed close together, change theremote control code on the main unit and the remote control (thetwo must match).Under normal circumstances use the factory set code “DVD 1”.1 While stoppedPress [FUNCTIONS].2 Press [3, 4, 2, 1] to select“SETUP” and press [ENTER].3 Press [3, 4] to select “Others” andpress [1].4 Press [3, 4] to select “RemoteControl” and press [ENTER].5 Press [3, 4] to select the code(“DVD 1”, “DVD 2” or “DVD 3”) andpress [ENTER].6 To change the code on the remote controlWhile pressing [ENTER], press andhold the numbered button ([1], [2] or[3]) for more than 2 seconds.7 Press [ENTER].∫ When the following indicator appears on theunit’s displayThe unit’s remotecontrol codeChange the code on the remote control to match the main unit’s(➡ step 6).[Note]Executing “Shipping Condition” in the SETUP menu returns themain unit code to “DVD 1”. Change the remote control code to 1(➡ step 6).Television operatione.g., 01: [0] ➡ [1]Brand CodePanasonic/National 01, 02, 03, 04GOLDSTAR/LG 15, 16HITACHI 08JVC 07MITSUBISHI 09, 10NEC 13PHILIPS 12SAMSUNG 12, 17, 18SANYO 14, 19SHARP 11SONY 05TOSHIBA 06When other Panasonic productsrespond to this remote controlSETUPDiscTuningRemote ControlOthersPress “±” and “ENTER” togetherfor more than 2 seconds on the remotecontrol.