Panasonic Diga DMR-E65 Operating Instructions Manual

Also see for Diga DMR-E65: Operating instructions Operating instructions

Contents

19RQT7450Recording≥Even when the unit is turned off, you can display the timerrecording list by pressing [PROG/CHECK].Press [PROG/CHECK].∫ To change a programmePress [3, 4] to select the programme and press [ENTER].(➡ page 18, step 3)∫ To delete a programmePress [3, 4] to select the programme and press [¢ CANCEL].∫ To exit the timer recording listPress [PROG/CHECK].∫ To put the unit on timer recording standbyPress [F TIMER].The unit turns off and “F” lights on the unit’s display to indicate timerrecording standby has been activated.≥Programmes that failed to record are deleted from the timerrecording list at 4 a.m. two days later.Check, change or delete a programmeMode DiscspaceStopStartNo. Name Date1:58 SPTIMERRECORDING Remain12:56:00 15. 7. TUENew Timer ProgrammeSELECTENTER RETURNPress ENTER to storenew programme.Icons[ This programme is currently recording.W The times overlap those in another programme.Recording of the programme with the later start timestarts when the earlier programme finishes recording.F The disc was full so the programme failed to record.The material was copy-protected so it was not recorded.X The programme did not complete recording because thedisc is dirty or some other reason.Message displayed in the “Disc space” lineOK: Displayed if the recording can fit in theremaining space.> (Date): For recordings made daily or weekly, the displaywill show until when recordings can be made (upto a maximum of one month from the presenttime) based on the time remaining on the disc.! : It may not be possible to record because:≥there is not enough space left≥the number of possible titles has reached itsmaximum.