27RQT7450Playing backThis function works only when the elapsed play time is displayed.§ Only when you have set “Progressive” to “On” in the SETUP menu(➡page 10).Status messages appear on the television when you operate the unitto show the condition of the unit.Press [STATUS].The display changes each time you press the button.≥Displayed information are examples.≥TV audio typeSTEREO: STEREO/NICAM stereo broadcastM 1/M 2: Bilingual/NICAM dual-sound broadcastM 1: NICAM monaural broadcastPlay menu—Change the play sequenceRepeat play≥All≥Chapter≥Group≥PL (Play list)≥Title≥Track[VCD] [CD] (excluding MP3 discs)[RAM] [DVD-R] [DVD-V][DVD-A] [CD] (MP3 discs only)[RAM][RAM] [DVD-R] [DVD-V][DVD-A] [VCD] [CD]Select “OFF” to cancel.Picture menu—Change the picture qualityPlayback NRReduces noise and picture degradation.Progressive§ (➡page 46)Select “ON” to enable progressive output.Select “OFF” if the picture is stretched horizontally.Transfer§ [When “Progressive” (➡ above) is set to “ON”.]Select the method of conversion for progressive output to suitthe type of material being played (➡ page 46, Film and video).When the output signal is PAL≥Auto≥Video:Detects 25 frame-per-second film content andappropriately converts it.Select when using “Auto”, and the videocontent is distorted.When the output signal is NTSC≥Auto1(normal):≥Auto2:≥Video:Detects 24 frame-per-second film content andappropriately converts it.Compatible with 30 frame-per-second filmcontent in addition to 24 frame-per-secondfilm content. (Picture distortion may occurdepending on the content)Select when using “Auto1” and “Auto2”, andthe video content is distorted.Sound menu—Change the sound effectV.S.S. [RAM] [DVD-R] [DVD-V](Dolby Digital, MPEG, 2-channel or over only)Enjoy a surround-like effect if you are using two front speakersonly.≥Turn V.S.S. off if it caused distortion.≥V.S.S. does not work for bilingual recordings.Dialog Enhancer [DVD-A] [DVD-V](Dolby Digital, 3-channel or over only, including a centre channel)The volume of the centre channel is raised to make dialogueeasier to hear.Status messages0:50 XP18:53:50 11.10.π T2 0:05.14 XPπ T1 0:00.10 SPRemainπRECPLAYSTEREOL RDVD-RAM Selected drive/Type of discTV audio type being received (➡ below)Recording or play status/input channelSelected audio typeAvailable recording timeand recording modePlay positionDate and timeNo displayTitle number and elapsed time during play/Recording modeTitle number and elapsed time duringrecording/Recording mode