Panasonic Diga DMR-E80H Operating Instructions Manual

Also see for Diga DMR-E80: Firmware instructions

Contents

29RQT6984DubbingTo stop dubbingPress and hold [RETURN] for 3 seconds.≥Data will be recorded up to the point recording was stopped. How-ever, if you stop dubbing in High Speed mode partway, the partyou tried recording will become unplayable. (Recording to DVD-Rwill reduce the remaining amount of recordable disc space.)To add or remove from the dubbing listWhile the Dubbing List (➜ step 4-1) is displayed1 Press [3, 4] to select the dubbing list and press [1].2 Press [3, 4] to select an item and press [ENTER].≥If you select “Add”, carry out steps 4-3 and 4-4. Addition willtake place above the program selected in step 1.≥If you select “Erase” or “Erase All”, a confirmation screen will bedisplayed. Press [2, 1] to select “Yes” or “No” and press[ENTER] (Return to Dubbing List).[Note]≥The contents of dubbing lists (from HDD to a disc) will remain inthe memory even after the power has been turned off. However,note that if programs and play lists are erased, all the dubbing listswill also be erased.≥It is not possible to activate timer recording during dubbing.≥The program settings (protect, etc) are reproduced in the dubbedmaterial. (If you select a recording mode other than “High Speed”,markers are not reproduced).≥Still pictures in programs and play lists (displayed with an inthe Dubbing select screen) cannot be dubbed. [RAM]≥When dubbing SAP broadcast to DVD-R or dubbing sound usingLPCM, the setting at “Select MTS” is given priority (➜ page 45, Audio).Some programs may not be recordable or may have limits on num-ber of times they can be dubbed. Refer to the table below for detailsabout storage media and associated limits.§1Turning “DVD-R compatible Rec ” to “On ” from the Setup menuallows dubbing to a DVD-R using the high speed mode after arecording has been saved to the HDD. (➜page 44)§2Transfer: this is when a program is moved to another storagemedia. All recorded content transferred to DVD-RAM is deletedfrom the HDD. When a program with recording limitations enters adubbing list, “ ” (Transfer) is displayed and a message screenis displayed when dubbing.Programs and play lists currently being played back on HDD cansimultaneously be dubbed to DVD-RAM or DVD-R.PreparationPress [HDD] to select HDD drive.1 During play or while pausedPress [DUBBING].The confirmation screen appears.2 Press [2, 1] to select “Yes” andpress [ENTER].To stop dubbingPress and hold [RETURN] for 3 seconds.≥Data will be recorded up to the point recording was stopped. How-ever, if you stop dubbing in High Speed mode partway, the partyou tried recording will become unplayable. (Recording to DVD-Rwill reduce the remaining amount of recordable disc space.)[Note]≥This function works even while the program list or play list screenis being displayed.≥It is not possible to activate timer recording during dubbing.≥Programs with recording limitations (including play lists made fromthose programs) cannot be dubbed.The recording mode is set as follows:≥High speed mode:–When dubbing to a DVD-RAM.–When the “DVD-R compatible Rec” setting is set to “On” and therecorded program is being dubbed to a DVD-R.≥Original dubbing mode:–When the “DVD-R compatible Rec” setting is set to “Off” and therecorded program is being dubbed to a DVD-R.≥FR (Flexible Recording) (➜page 16):–Based on the above conditions, the mode automatically changesto FR when there is not enough room left on the disc.–When playlist dubbing.Recording LimitsRecordRecording limit Usable MediaNorecordinglimitRecordinglimited toone timeRecordingnot possibleHDD DubTransfer§2§1DVD-RRAMRAMRecordRecord Dub HDDDVD-R Dub You cannotdub.Record HDD RAMRAMRecord DubRecord You cannot record on DVD-R.You cannot record/dubon any media.RecordContent isduplicated onHDD but cannotbe played.One Touch Dubbing (HDD ➜ DVD)