Panasonic Diga DMR-E85H Operating Instructions Manual

Also see for DIGA DMR-E85H: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Contents

38RQT7462Convenient functionsChanging the unit’s settingsTabs Menus Options (Underlined items are the factory presets.)Sound PLAY k1.3 & Audio during SearchYou may hear sound regardless of this setting with some discs.≥On: Audio is heard during first level search forward.≥Off: Audio is not heard during search. Quick View (➡page 21)does not work.Dynamic Range Compression [DVD-V] (Dolby Digital only)Change the dynamic range for late night viewing.≥On≥OffBilingual Audio SelectionSelect whether to record the main or secondary audio typewhen:–Recording or transferring (dubbing) to a DVD-R.–Recording or transferring (dubbing) sound in LPCM. (➡ below,“Audio Mode for XP Recording”)You cannot select this when recording from an external sourceonto DVD-R. Select the audio on the other equipment.≥M 1≥M 2Digital Audio OutputChange the settings when you have connected equipment through this unit’s DIGITAL AUDIO OUT terminal (➡ page 8).≥Press [ENTER] to show the following settings.PCM Down ConversionSelect how to output audio with a sampling frequency of 96kHz or 88.2 kHz.≥Signals are converted to 48 kHz or 44.1 kHz despite theabove settings if the signals have a sampling frequencyof over 96 kHz or 88.2 kHz, or the disc has copyprotection.≥On: Signals are converted to 48 kHz or 44.1 kHz. (Choosewhen the connected equipment cannot process signalswith a sampling frequency of 96 kHz or 88.2 kHz.)≥Off: Signals are output as 96 kHz or 88.2 kHz. (Choose whenthe connected equipment can process signals with asampling frequency of 96 kHz or 88.2 kHz.)Dolby Digital Select how to output the signal, to output“Bitstream” so the connected equipmentdecodes the signal, or to decode on thisunit and output the signal as “PCM” (2channel).[Note]Not making the proper settings may resultin noise, possibly damage your hearingand speakers, and digital recording maynot work properly.≥Bitstream: When connecting to equipment displaying theDolby Digital logo.≥PCM: When connecting to equipment not displaying the DolbyDigital logo.DTS ≥Bitstream: When connecting to equipment displaying the DTSlogo.≥PCM: When connecting to equipment not displaying the DTSlogo.MPEG ≥Bitstream: When connected to equipment with a built-inMPEG decoder.≥PCM: When connected to equipment without a built-in MPEGdecoder.Audio Mode for XP RecordingChoose the audio type when recording or transferring (dubbing)with XP mode.≥Dolby Digital (➡page 44)≥LPCM (➡ page 44)–The picture quality of LPCM recordings may be less than thatof normal XP mode recordings.–The audio recording becomes Dolby Digital even if youselected LPCM when using a recording mode other than XP.–When recording bilingual broadcast, select the type of audioin advance from “Bilingual Audio Selection” (➡ above).Display On-Screen MessagesChoose whether to show status messages automatically.≥Automatic≥OffGrey BackgroundSelect “Off” if you do not want to have the unit show the greybackground when reception is weak.≥On≥OffFL DisplayChanges the brightness of the unit’s display.This setting is fixed with “Automatic” if you set “Power Save”(➡ page 36) to “On”.≥Bright ≥Dim≥Automatic: The display turns dark during play, and reappearsmomentarily if a button is pressed. When the unitis turned off all displays disappear. While using thismode the standby power consumption can bereduced.