Panasonic Diga DMR-EH50 Operating Instructions Manual

Also see for Diga DMR-EH50: Operating instructions Quick setup guide Operating instructions Operating instructions Operating instructions

Contents

nr_'a i'_mPlaying from the beginning of the title you arerecording--Chasing playbackPress [1_] (PLAY) during recording.oThere is no sound output while searching forward or backward.To stop playPress [Ill.To stop recording2 seconds after play stopsPress [m].To stop timer recordingPress [_ TIMER].oYeu can also press and hold [el on the main unit for more than 3seconds to stop recording.Playing a title previously recorded while recording--Simultaneous rec and playoYou can also change the drive and play while recording. Press[HDD] or [DVD].1 Press [DIRECT NAVIGATOR] duringrecording.2 Press [&, I', _I, I_] to select a titleand press [ENTER].oThere is no sound output while searching forward or backward.To stop playPress [m].To exit the Direct Navigator screenPress [DIRECT NAVIGATOR].To stop recordingAfter play stops1 Press [DIRECT NAVIGATOR] to exit screen.2 If the recording is on the other drivePress [HDD] or [DVD] to select the recording drive.3 Press [m].To stop timer recordingPress [G TIMER].oYou can also press and hold [1] on the main unit for more than 3seconds to stop recording.Reviewing the recorded images while recording--Time SlipWhile recording, you can play a scene in the title being recorded or apreviously recorded title. Both the images being played and recordedare shown.1 Press [TIME SLIP] during recording.2.,_, /_ Play starts from 30secondsprevieusThe image currently beingI _--_,,_-_ recordedoYou will hear the playback audio.Press [A, T] to select the time andpress [ENTER].oEach time you press [A, Y], the time increases [A] ordecreases [Y] by 1 minute.(Press and hold for 10-minute intervals.)oPress [TIME SLIP] to show the play images in full. Pressagain to show the play and recording images.To stop playPress [m].To stop recording2 seconds after play stopsPress [m].To stop timer recordingPress [_3 TIMER].oYou can also press and hold [1] on the main unit for more than 3seconds to stop recording.Chasing play can only be used with programmes of the sameencoding system (PAL/NTSC).When connected to a television that has the Q Linkfunction using a fully wired 21-pin Scart cable.This function allows you to immediately start recording theprogramme that you are viewing on the TV.1 Press [HDD] or [DVD] to select therecording drive.The HDD or DVD indicator lights up on the unit.If you selected the DVD driveInsert a disc. (-_ 22)3 Press and hold [O DIRECT TV REC]for I second.Recording starts.To stop recordingPress [m].Preparation=Connect a satellite/digital receiver or decoder to this unit's inputterminals (=_17).oWhen recording bilingual programmesiw'a iv_lWhen both M 1 and M 2 is selected on the connected equipment,you can select the audio type in playback.Select either M 1 or M 2 on the connected equipment. (Only eitherone type of M 1 or M 2 can be recorded.)oWhen the output signal from the external equipment is NTSC,change the "TV System" to "NTSC" in the SETUP menu (= 61).This unit cannot record to discs containing both PAL and NTSCsignals. (However, both types of programmes can be recordedonto the HDD.)• Press [HDD] or [DVD] to select the recording drive.While stoppedPress [INPUT SELECT] to select theinput channel for the equipment youhave connected.e.g.,If you have connected to AV2 input terminals, select "AV2".2 Press [REC MODE] to select therecording mode.3 Select the channel on the otherequipment.4 Press [O REC].Recording starts.To skip unwanted partsPress [I I] to pause recording. (Press again to restart recording.)To stop recordingPress [m].e}_o.ooRQT8027