Panasonic Diga DMR-EH50 Operating Instructions Manual

Also see for Diga DMR-EH50: Operating instructions Operating instructions Quick setup guide Operating instructions Operating instructions

Contents

32RQT8027Playing recorded video contents/Playing play-only discsRefer to the control reference on page 30.(continued)Press [AUDIO].[HDD] [RAM] [-RW‹VR›] [VCD]LR>L>R^---------------}[DVD-V] [DVD-A]You can change the audio channel number each time you press thebutton. This allows you to change things like the soundtracklanguage (➡ 36, Soundtrack).[Note]You cannot change the audio type in the following cases.≥When a DVD-R, DVD-RW (DVD-Video format) or +R disc is in the disc tray while DVD drive is selected.≥When the recording mode is XP and “Audio Mode for XP Recording” is set to “LPCM” (➡ 56).≥When “Rec for High Speed dubbing” is set to “On” (➡ 24).Operations during playDisplaying the televisionimage as a picture-in-picture[HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]Press [TIME SLIP].The unit displays the television image as a picture-in-picture.≥You will hear the playback audio.≥Press [TIME SLIP] again to cancel.≥Time Slip does not work when the unit’s “TVSystem” settings are different from the titlerecorded.Skipping the specifiedtime (Time Slip)[HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]1 Press [TIME SLIP].2 Press [3, 4] to select the time and press [ENTER].Play skips the specified time.≥Each time you press [3, 4], the time increases [3] or decreases [4] by1 minute intervals. (Press and hold for 10-minute intervals.)≥Press [TIME SLIP] to show the play images in full.[Note]Time Slip does not work while timer recording is in standby.Manual Skip[HDD] [RAM] [-R] [-RW‹V›] [+R] [-RW‹VR›]Press [MANUAL SKIP].Each time you press, play restarts approximately 30 seconds later.Simple editing operations during play0 minPLAYARDPlay imagesCurrent receiving images≥You can change the channel beingreceived by pressing [W X CH].(You cannot change the channel beingreceived while recording.)-5 minPLAYARDErase[HDD] [RAM] [-R] [-RW‹V›] [+R]Erase titles etc. during play1 Press [ERASE].2 Press [2, 1] to select “Erase” and press [ENTER].≥A title cannot be restored once it is erased. Make certain before proceeding.≥You cannot erase while recording or transferring (dubbing)≥[-R] [+R] Available space does not increase after erasing.≥[-RW‹V›] Disc space increases only when the last recorded title is erased.Create Chapter(➡ 38, Title/Chapter)[HDD] [RAM]Press [CREATE CHAPTER].Chapters are divided at the point pressed.≥Press [:, 9] to skip to the start of a chapter.≥Chapters cannot be created during EXT LINK standby.Changing audio during playPLAYL RHDDe.g., “L R” is selectedSoundtrack 1 ENG Î Digital 3/2.1che.g., English is selected.Playing recorded video contents/Playing play-only discs