Panasonic Diga DMR-EH575 Operating Instructions Manual

Also see for Diga DMR-EH575: Operating instructions

Contents

18RQT8881Linked operations with the TV (VIERA Link “HDAVI Control TM” /Q Link)You can enjoy linked operations with the TV and receiver by using “HDAVI Control” or Q Link.Preparation1. Connect this unit to your TV or receiver with an HDMI cable(➡ 17).2. Set “VIERA Link” to “On” (➡ 65). (The default setting is “On”.)3. Set the “HDAVI Control” operations on the connected equipment(e.g., TV).≥When using HDMI2 terminal of VIERA as “HDAVI Control”,set the input channel to HDMI2 on VIERA.4. Turn on all “HDAVI Control” compatible equipment and select thisunit’s input channel on the connected TV so that the “HDAVIControl” function works properly.Also when the connection or settings are changed, repeatthis procedure.Preparation≥Connect this unit to your TV with a fully wired 21-pin Scart cable(➡ 14).For your referenceThe following systems from other manufacturers have similarfunction to Q Link from Panasonic.For details, refer to your television’s operating instructions or consultyour dealer.≥Q Link (registered trademark of Panasonic)≥DATA LOGIC (registered trademark of Metz)≥Easy Link (registered trademark of Philips)≥Megalogic (registered trademark of Grundig)≥SMARTLINK (registered trademark of Sony)What you can do with “HDAVI Control” and Q Link§1 This button is available only when this unit is on.§2 When this button is pressed, the playback image is not immediately displayed on the screen and it may not be possible to watch the contentsfrom where playback started.In this case, press [:] or [6] to go back to where playback started.[Note]≥These functions may not work normally depending on the equipment condition.≥About “HDAVI Control” function, read the manual of the connected equipment (e.g., TV) too.What is VIERA Link “HDAVI Control” ?VIERA Link “HDAVI Control” is a convenient function that offerslinked operations of this unit, and a Panasonic TV (VIERA) orreceiver under “HDAVI Control”. You can use this function byconnecting the equipment with the HDMI cable. See the operatinginstructions for connected equipment for operational details.≥VIERA Link “HDAVI Control”, based on the control functionsprovided by HDMI which is an industry standard known asHDMI CEC (Consumer Electronics Control), is a unique functionthat we have developed and added. As such, its operation withother manufacturers’ equipment that supports HDMI CECcannot be guaranteed.≥This unit supports “HDAVI Control 2” function.“HDAVI Control 2” is the newest standard (current as ofFebruary, 2007) for Panasonic’s HDAVI Control compatibleequipment. This standard is compatible with Panasonic’sconventional HDAVI equipment.What is Q Link?Q Link is a convenient function that offers linked operations ofthis unit and a Panasonic TV. You can use this function byconnecting the equipment with a fully wired 21-pin Scart cable.Download from the TV[Q]Link]When you connect the unit to a TV for the first time, the station list data is automatically copied from the TVto the unit and the TV stations are assigned to the programme positions on the unit in the same order ason the TV (➡ 20).(When the TV is on)Easy playback[VIERA]Link] [Q]Link]When the TV is on and the following operations are performed, the TV’s input will automatically switch toHDMI input mode and the TV displays the corresponding action.(Picture or sound may not be available for the first few seconds.)Press [FUNCTION MENU]§1, [1] (PLAY)§2, [DIRECT NAVIGATOR], [GUIDE], [ShowView],[PROG/CHECK] etc.(When the TV is off)Power on link[VIERA]Link] [Q]Link]When the TV is off and the following operations are performed, the TV will automatically turn on anddisplays the corresponding action.(Picture or sound may not be available for the first few seconds.)Press [FUNCTION MENU]§1, [1] (PLAY)§2, [DIRECT NAVIGATOR], [GUIDE], [ShowView],[PROG/CHECK] etc.≥[DVD-V] [CD] [VCD] SVCD and MP3The TV is automatically turned on when you insert the discs.Power off link[VIERA]Link] [Q]Link]When you set the TV to standby mode, the unit is also automatically set to standby mode. The unit isautomatically set to standby mode even if the FUNCTION MENU screen, the status message, or the on-screen menu is displayed during playback or when the unit set to a timer recording.Even if the TV is set to standby mode, the unit will not be set to standby mode at the same time in thefollowing conditions:–when you pressed [¥ REC] and the unit is recording,–when copying,–when finalising, etc.≥When this unit is connected to an “HDAVI Control” compatible Panasonic receiver with an HDMI cable,the receiver will also turn off.Direct TV Recording[Q]Link]This function allows you to immediately start recording the programme that you are viewing on the TV.≥However this function does not work if you select the TV channels on this unit.Preparation≥Press [DRIVE SELECT] to select the HDD or DVD drive.The selected drive lights up on the unit’s display.≥If you selected the DVD driveInsert a disc. (➡ 26)Press and hold [¥ DIRECT TV REC] for 1 second.Recording starts.To stop recordingPress [∫].