24RQT8881Set up to match your television and remote controlYou can enjoy progressive video by connecting this unit’sCOMPONENT VIDEO OUT terminals to an LCD/plasma televisionor LCD projector compatible with progressive scan (➡ 81).1 While stoppedPress [FUNCTION MENU].2 Press [3, 4] to select “To Others”and press [OK].3 Press [3, 4] to select “Setup” andpress [OK].4 Press [3, 4] to select “Connection”and press [1].5 Press [3, 4] to select “Progressive”and press [OK].6 Press [3, 4] to select “On” and press[OK].Output becomes progressive.[Note]≥When connected to a regular television (CRT: Cathode ray tube) ora multi system television using PAL mode, even if it is progressivecompatible, progressive output can cause some flickering. Turn off“Progressive” if this occurs (➡ 45).≥Picture will not be displayed correctly if connected to anincompatible television.≥There is no output from the COMPONENT VIDEO OUT terminals if“AV1 Output” in the Setup menu is set to “RGB 1 (withoutcomponent)” or “RGB 2 (without component)” (➡ 65).To return to the previous screenPress [RETURN].To exit the screenPress [EXIT].You can configure the remote control TV operation buttons to turnthe television on/off, change the television input mode, select thetelevision channel and change the television volume.1 Point the remote control at the televisionWhile pressing [Í TV], enter the codewith the numbered buttons.To enjoy progressive videoTIME SLIPTIME SLIPDISPLAYDISPLAYSTATUSSTATUSAUDIOAUDIODIRECT TV RECDIRECT TV RECEXT LINKEXT LINKREC MODEREC MODERECRECMANUAL SKIPMANUAL SKIPCREATECREATECHAPTERCHAPTERFUNCTIONMENUDIRECTNAVIGATORGUIDERETURNRETURNPLAY/x1.3PAUSEPAUSESTOPSTOPSLOW/SEARCHSLOW/SEARCHSKIPSKIPShowViewShowViewCHCHPAGEPAGESELECTINPUT0987654321CHCHAVAVÍTVTVDRIVEDRIVESELECTSELECTÍDVDVOLDELETE PROG/CHECKEXITOKOPTION3,4,2,1OKFUNCTIONMENURETURNEXITNumberedbuttonsTV operationbuttonsRemainFUNCTION MENU70:00 SPHDDRecordingPlaybackCopyDeleteTo OthersOKRETURNSetupDownload from TVManual TuningAuto-Setup RestartDiscPictureSoundDisplayTuningConnectionOthersTABRETURNSELECTTelevision operatione.g., 01: [0] ➡ [1] 10: [1] ➡ [0]SetupAV2 SettnigsVideoAV1 OutputHDMI SettingsPALTV SystemOffProgressiveTV Aspect 16:9DiscPictureSoundDisplayTuningConnectionOthersTABRETURNSELECTOKSetupOffOnProgressiveDiscPictureSoundDisplayTuningConnectionOthers RETURNSELECTOKShowViewShowViewCHCHPAGEPAGE654321CHCHAVAVÍTVTVDRIVEDRIVESELECTSELECTÍDVDVOLTurn TV on/offInput selectVolumeChannelSelect