RQT802038 Convenient fuctions ENGLISHChanging the unit’s settingsRefer to the control reference on page 34.1 While stoppedPress [FUNCTIONS].2 Press [e, r] to select “To Others” andpress [ENTER].3 Press [e, r] to select “SETUP” andpress [ENTER].4 Press [e, r] to select “Tuning” andpress [q].You can add or delete channels, or change programme positions.5 Press [e, r] to select “Manual” andpress [ENTER].To delete a programme positionPress [e, r, w, q] to select a programme position and press [A].To add a blank programme positionPress [e, r, w, q] to select a programme position and press [B].To move a TV station to another programme positionPress [e, r, w, q] to select a programme position and press [C].Press [e, r, w, q] to select the new programme position towhich you want to assign the TV station and press [ENTER].NoteIf Preset Download (➔ page 10) has been performed, only deletionof the programme position can be performed.■ To change the tuning settings for individualprogramme position6 Press [e, r, w, q] to select aprogramme position and press[ENTER].Press [e, r] to select an item and press [q].■ Available items for each model•Pos •Name •Channel •Fine Tuning •Decoder •Video System•Audio Mode •Mono •Title Page•Pos •Name •Channel •Fine Tuning •Mono•Pos •Name •Channel •Fine Tuning •Video System •Audio Mode•Mono•Pos •Name •Channel •Fine Tuning •Video System •MonoYou can make the following two settings by selecting the externalinput channel (AV1, AV2, AV3, AV4) in step 5.• Video System (Auto/PAL/SECAM)In order to record properly, make the appropriate settings to matchthe connected equipment.• Title Page (Auto/Off)Not provided for Germany, Austria, Italy, Netherlands, GreeceTuningManualSETUPDiscTuningManualAuto-Setup RestartDownload from TVe.g., Continental EuropeManual TuningPos Name Ch Pos Name ChDeleteAddMove1234425810567891011121314151617181920ENTERRETURNSELECTARDZDFN3HR3BR3B CA12For Continental EuropePosNameChannelFine TuningDecoderVideo System1Off4AutoRETURN : leaveManualTuning ARDAutoAudio Mode BGMono OffTitle Page 301RETURNCHANGEe.g., Continental EuropePos To change the programme position in which theTV stations are assignedPress [e, r] or numbered buttons to select thenumber of the desired programme position andpress [ENTER].Name To enter or change the name of a TV stationPress [e, r, w, q] to enter station name and press[ENTER].If the station name needs a blank space, select theblank between “Z” and “ ”.Channel To enter newly available TV stations or changethe channel number of an already tuned TVstationPress [e, r] or the numbered buttons to enter thechannel number of the desired TV station.Wait a few moments until the desired TV station hasbeen tuned.After the desired TV station is tuned, press[ENTER].FineTuningTo obtain the best tuning conditionPress [e, r] to adjust the best tuning conditionand press [ENTER].•Press [q] to return to “Auto”.Decoder To preset pay TV stationsPress [e, r] to select “On” and press [ENTER].VideoSystemTo select the video system typePress [e, r] to select “PAL” or “SECAM” if thepicture lacks colour, and press [ENTER].Auto: This unit automatically distinguishes PALand SECAM signals.PAL: For receiving PAL signals.SECAM: For receiving SECAM signals.AudioModeTo select the audio reception typeIf sound quality is poor, press [e, r] to select itemsand press [ENTER].BG: PAL B.G.H/SECAM B.GL: SECAM L,L’ /PAL LBG: PAL B.GDK: PAL D.K.K1I: PAL IMono To select the type of sound to be recordedPress [e, r] to select “On” if the stereo sound isdistorted due to inferior reception conditions, or ifyou want to record the normal (mono) sound duringa stereo, bilingual or NICAM broadcast, and press[ENTER].Title Page To enter the Teletext title page for a channelEntering title page number allows the unit toautomatically record programme and stationnames.Press [e, r] or numbered buttons to enter thenumber and press [ENTER].•To find the correct title page for the station, refer toits Teletext TV guide.For Continental EuropeFor Australia and N.Z.For AsiaFor Middle EastFor Continental EuropeFor Asia