Panasonic Diga DMR-ES10 Operating Instructions Manual

Also see for Diga DMR-ES10: Operating instructions

RQT802047 Reference ENGLISHPlay (Continued) PageEditOtherSet the unit up on an even surface away from direct sunlight, hightemperatures, high humidity, and excessive vibration. Theseconditions can damage the cabinet and other components, therebyshortening the unit’s service life.Do not place heavy items on the unit.Do not use high voltage power sources. This can overload the unitand cause a fire.Do not use a DC power source. Check the source carefully whensetting the unit up on a ship or other place where DC is used.Ensure the AC mains lead is connected correctly and notdamaged. Poor connection and lead damage can cause fire orelectric shock. Do not pull, bend, or place heavy items on the lead.Grasp the plug firmly when unplugging the lead. Pulling the ACmains lead can cause electric shock.Do not handle the plug with wet hands. This can cause electric shock.Do not let metal objects fall inside the unit. This can cause electricshock or malfunction.Do not let liquids get into the unit. This can cause electric shock ormalfunction. If this occurs, immediately disconnect the unit from thepower supply and contact your dealer.Do not spray insecticides onto or into the unit. They containflammable gases which can ignite if sprayed into the unit.Do not attempt to repair this unit by yourself. If sound isinterrupted, indicators fail to light, smoke appears, or any otherproblem that is not covered in these instructions occurs, disconnectthe AC mains lead and contact your dealer or an authorized servicecenter. Electric shock or damage to the unit can occur if the unit isrepaired, disassembled or reconstructed by unqualified persons.Extend operating life by disconnecting the unit from the powersource if it is not to be used for a long time.Angle cannot be changed. • Angles can only be changed during scenes where different angles are recorded. —You have forgotten yourratings password.• While the disc tray is open, press and hold [* REC] and [q (PLAY/x1.3)] on the main unit atthe same time for 5 or more seconds.—Quick View does not work. •• This does not work when audio is other than Dolby Digital.This does not work when recording is in XP or FR mode.——The resume play function doesnot work.•• This function only works when the indicator appears in the unit display.Memorized positions are canceled when the unit is turned off or when thetray is opened. The memorized position on the playlist is also canceledwhen the playlist and title are edited.——The Video CD picture does notdisplay properly.•• When connecting to Multi-system TV, select “NTSC” in “TV System” in the SETUP menu.When connecting to PAL TV, the lower part of the picture cannot be displayed correctly during search.39—Time Slip does not work. • Time Slip does not work when the unit’s “TV System” settings are different from the titlerecorded on the disc. 39Cannot format. •• The disc is dirty. Wipe with a damp cloth and then wipe dry.You tried formatting a disc that is not compatible with this unit.54, 5Cannot create chapters.Cannot mark the start point orthe end point during “PartialErase” operation.•••The unit writes the chapter information to the disc when you turn it off or remove the disc. Theinformation is not written if there is an interruption to the power before this.These operations are not possible with still pictures.You cannot set points if they are too close to each other. You cannot set an end point before astart point.———Cannot erase chapters. • When the chapter is too short to erase, use “Combine Chapters” to make the chapter longer. 29The available recording spacedoesn’t increase even aftererasing recordings on thedisc.••Available recording space on the DVD-R or the +R does not increase even after erasingpreviously recorded titles.Available recording space on a DVD-RW (DVD-Video format) increases only when the lastrecorded title is erased. It does not increase if other titles are erased.——Cannot create a playlist. • You cannot select all the chapters at once in a title if the title also includes still pictures. Selectthem individually.—Output is not digital. • Output is not digital with DVD-Audio. —Safety precautionsPlacementVoltageAC mains lead protectionForeign matterServiceMPEG Layer-3 audio decoding technology licensed fromFraunhofer IIS and Thomson multimedia.This product incorporates copyright protection technology that isprotected by method claims of certain U.S. patents and otherintellectual property rights owned by Macrovision Corporationand other rights owners. Use of this copyright protectiontechnology must be authorized by Macrovision Corporation, andis intended for home and other limited viewing uses only unlessotherwise authorized by Macrovision Corporation. Reverseengineering or disassembly is prohibited.Manufactured under license from Dolby Laboratories. “Dolby”and the double-D symbol are trademarks of DolbyLaboratories.“DTS” and “DTS 2.0 + Digital Out” are trademarks of DigitalTheater Systems, Inc.SHOWV IEW is a trademark of Gemstar Development Corporation.The S HOW VIEW system is manufactured under licence fromGemstar Development Corporation.G- CODE is a trademark of Gemstar Development Corporation.The G- CODE system is manufactured under licence from GemstarDevelopment Corporation.G- CODE is a registered trademark of Gemstar DevelopmentCorporation. The G- CODE system is manufactured under licensefrom Gemstar Development Corporation.

/ 48

Related manuals for Panasonic Diga DMR-ES10