Panasonic Diga DMR-ES16 Operating Instructions Manual

Contents

RQT895015Remote control settingsRefer to the control reference on page 14.You can operate the TV through the unit’s remote control.Point the remote control at the televisionWhile pressing [^ POWER TV], enter the code withthe numbered buttons.e.g., 0250: [0] Ô [2] Ô [5] Ô [0]Manufacturer and Code No.Test by turning on the television and changing channels. Repeat theprocedure until you find the code that allows correct operation.• If your television brand is not listed or if the code listed for yourtelevision does not allow control of your television, this remotecontrol is not compatible with your television.When other Panasonic products placed nearby affect this unit’sremote control, change the remote control code on the main unit andthe remote control (the two must match).Use “1”, the factory set code, under normal circumstances.To change the code on the main unit1 While stoppedPress [SETUP].2 Press [e,r] to select “Setup” andpress [q].3 Press [e,r] to select “Remote ControlCode” and press [ENTER].4 Press [e,r] to select the code (“1”,“2” or “3”) and press [ENTER].To change the code on the remote control5 While pressing [ENTER], press andhold the numbered button ([1], [2] or[3]) for more than 2 seconds.6 Press [ENTER].n When the following indicator appears on theunit’s displayPress and hold [ENTER] andthe indicated number buttonat the same time for morethan 2 seconds.To exit the screenPress [SETUP].To return to the previous screenPress [RETURN].Clock settingsRefer to the control reference on page 14.In the case of a power failure, the clock setting remains in memoryfor approximately 1 minute.1 While stoppedPress [SETUP].2 Press [e,r] to select “Setup” andpress [q].3 Press [e,r] to select “Clock Settings”and press [ENTER].4 Press [e,r] to select “Set ClockManually” and press [ENTER].5 Press [w,q] to select the item youwant to change and press [e,r] tochange the setting.• DST (Daylight Saving Time): On or OffIf you select “On”, the clock is advanced one hour starting at2 a.m. on the first Sunday in April and ending at 2 a.m. onthe last Sunday in October.• Time Zone shows the time difference from Greenwich MeanTime (GMT).6 Press [ENTER].The clock starts.Adjust the time zone (–1 or +1) if it was not set correctly with autoclock setting.You can set this menu only after “Set Clock Automatically” iscompleted.1 While stoppedPress [SETUP].2 Press [e,r] to select “Setup” andpress [q].3 Press [e,r] to select “Clock Settings”and press [ENTER].4 Press [e,r] to select “Adjust TimeZone” and press [ENTER].5 Press [e,r] to select “–1” or “+1” andpress [ENTER].To exit the screenPress [SETUP].To return to the previous screenPress [RETURN].Television operationPanasonicNationalQUASAR0051/0250 PHILIPS (RC-5) 0054RCA 0047SAMSUNG 0060/0587/0702FISHER 0154 SANYO 0154GE 0047 SHARP 0093/0165GOLDSTAR 0178/0317/0457SONY 0000HITACHI 0145 SYLVANIA 0054JVC 0053 THOMSON 0047LG 0178/0317/0457TOSHIBA 0156MAGNAVOX 0054 ZENITH 0017MITSUBISHI 0150When other Panasonic productsrespond to this remote controlSetup Remote Control CodePress " " and "ENTER" togetherfor more than 2 seconds on the remote.ChannelSetupDiscVideoA diSet Clock ManuallyEST (Eastern Standard Time) = GMT –5CST (Central Standard Time) = GMT –6MST (Mountain Standard Time) = GMT –7PST (Pacific Standard Time) = GMT –8AST (Alaska Standard Time) = GMT –9HST (Hawaii Standard Time) = GMT –10Adjust Time ZoneSetupChannelSetupDiscVideoAudioSet Clock Manually/ :/ SAT AMDSTEST1 1 2000 12OffTime ZoneEST00Month Day Year Hour MinuteDST, Time Zone (Ô below)Channel captions/Television type/Remote control settings/Clock settings