Panasonic Diga DMR-ES16 Operating Instructions Manual

Contents

RQT8950211 When the unit is onPress [g].The confirmation screen appears.2 Press [w,q] to select “Stop recording”and press [ENTER].Recording stops and the scheduled recording is cancelled.(Daily and weekly schedules remain and scheduled recordingwill start as programmed.)1 Press [SCHEDULE].2 Press [e,r] to select the program andpress [SUB MENU].3 Press [e,r] to select “Schedule set toOff” and press [ENTER].Cancelled icon is displayed in left column.• Be sure to select “Schedule set to On.” in step 3 before thescheduled time to put the program on recording standby.• “z” flashes on the unit’s display for about 5 seconds when the unitcannot go to scheduled recording standby (e.g., a recordable discis not in the disc tray).• Scheduled recordings begin when the set time is reached evenwhen recording or when playing.• If the unit is turned on when scheduled recording begins, it remainsturned on after recording finishes. It does not turn off automatically.You can turn the unit off during scheduled recording.• If you are making consecutive recordings that will start one afterthe other, the beginning of the later program cannot be recorded.e.g., Program1 10:00–11:00Program2 11:00–12:00• If the actual broadcasting times of scheduled recordings overlap,the recording that starts first always has priority, and the recordingof the later program will start only after the first scheduledrecording has finished.• If you set DST (Daylight Saving Time) to On when manually settingthe clock (Ô page 15), scheduled recording may not work whensummer switches to winter and vice versa.Even when the unit is turned off, you can display the schedule list bypressing [SCHEDULE].Press [SCHEDULE].n To change a programPress [e,r] to select the program and press [ENTER](Ô page 20, step 3).• During scheduled recording, you can change the end time as longas the recording mode is not “FR”.n To delete a programPress [e,r] to select the program and press [CANCEL ] or[ADD/DLT].n To cancel recording that has already begunPress [e,r] to select program and press [SUB MENU], thenpress [ENTER].n To exit the schedule listPress [SCHEDULE].• Programs that failed to record are displayed gray, and cannot bechanged. They are automatically deleted from the schedule list at 4a.m. two days later.Cancel scheduled recording that hasalready begunRelease program from recordingstandbyNotes on scheduled recordingScheduleListChannelNo64 ABC0111:00Program2Program1RecordedRecordedNot recordedCheck, change or delete a programCANCELS SUB MENU Timer Off AScheduleList Remaining Recording Time3/26 Tue 12:53 PM1:58 SPChannelNo Date OnNew Scheduled RecordingOff Mode CheckENTERRETURNIconsThis program is currently recording.The times overlap those in another program.Scheduled recording standby is cancelled. Recording will notstart at the scheduled time.You stopped a weekly or daily scheduled recording. The icondisappears the next time the scheduled program startsrecording.The disc was full so the program failed to record.The material was copy-protected so it was not recorded.The program did not complete recording because the disc isdirty or for some other reason.WFXMessage displayed in the Check lineOK: Displayed if the recording can fit in the remainingspace.→ (Date): For recordings made daily or weekly, the display willshow until when recordings can be made (up to amaximum of one month from the present time)based on the time remaining on the disc.!: It may not be possible to record because:• no disc is inserted• the disc is write-protected• there is no more space left• the number of possible titles has reached itsmaximum• scheduled recording standby is cancelledOverlap: The times overlap those in another program.Recording of the program with the later start timestarts when the earlier program finishes recording.Scheduled recording