56RQTV0134Changing the unit’s settingsUse the following procedure to change the settings if necessary.[1] While stoppedPress [FUNCTIONS].[2] Select “OtherFunctions” with [3, 4]and press [ENTER].[3] Select “Setup” with[3, 4] and press[ENTER].[4] Select a menu with [3, 4] and press [2, 1].[5] Select an item to be changed with [3, 4] andpress [ENTER].[6] Select an option with [3, 4] and press [ENTER].≥Some options require different operations. Follow thedisplayed instructions.∫ To return to the previous screenPress [RETURN]. Even if you have changed an option, the changeis not activated until you press [ENTER].∫ To exit the screenPress [RETURN] several times.For your reference≥The settings remain intact even if you switch the unit to standby.You can limit play of DVDs unsuitable for some audiences (children,for example). Play and changes to the settings are not possibleunless you enter a password.Preparation≥Select DVD side with pressing [DRIVE SELECT].When setting ratingsThe password screen is shown when you select levels 0 to 7.[1] Input a 4-digit password with the numeric buttons.≥If you enter a wrong number, press [2] to erase it before youpress [ENTER].≥Do not forget your password.[2] Press [ENTER].[3] Press [ENTER].The password is entered and the unit is locked.Now, when you insert a DVD-Video that exceeds the ratings limityou set, a message appears on the TV.Follow the on-screen instructions.When changing ratingsThe password screen is shown when you select “Ratings” (l right)[1] Input a 4-digit password with the numeric buttons and press[ENTER].Unlock Recorder: To unlock the unit and return the rating to 8Change Password: To change your passwordChange Level: To change the rating levelTemporary Unlock: To temporarily unlock the unit (the unit locksagain if you switch it to standby or open thedisc tray)[2] Select a desired item with [3, 4] and press [ENTER].Actual screens depend on the operation. Follow the on-screeninstructions.This description shows the initial settings for the unit. Fordetails on menu operation. (l left)≥Underlined items are the factory default settings.≥ indicates settings effective for both DVD andVHS.≥ indicates settings effective for DVD only.≥ indicates settings effective for VHS only.∫ ChannelSignal Source (RF IN) (l 17)Select to suit the type of antenna you are using.[Antenna] [CableTV]Set Channels Automatically (l 17)Preset Channel Captions (l 18)Manual Channel Captions (l 18)∫ SetupOff TimerSelect how long the unit remains on when it is not being used.[2 Hours] [6 Hours] [Off]Remote Control Code (l 19)[Set Code 1] [Set Code 2] [Set Code 3]Clock SettingsPress [ENTER] to show the following settings.Set Clock Automatically (l 20)Set Clock Manually (l 17)Adjust Time Zone (l 20)This corrects the time set in Auto Clock Setting.The status is not displayed on the Setup menu when the AutoClock Setting is not set.[j1] [0] [i1]Quick Start1 Sec. Quick Start for Recording on DVD-RAM°° From the power off state, recording on DVD-RAM starts about 1second after first pressing the [Í, DVD/VHS POWER] and thensequentially pressing the [¥, REC] (Quick Start Mode).Power consumption is also higher when the unit is turned off if this isset to “On”.[On] [Off]Restore Default SettingsThis returns Setup menus to default settings, except for the clock,channel settings, ratings level, and on-screen language.[Yes] [No]∫ DiscSettings for PlaybackPress [ENTER] to show the following settings.Ratings (“Entering a password (Ratings)” l left)Set a ratings level to limit DVD-Video play.Setting ratings (When level 8 is selected)[8 No Limit]: All DVD-Video can be played.[1] to [7]: Prohibits play of DVD-Video with correspondingratings recorded on them.[0 Lock All]: Prohibits play of all DVD-Video.Changing ratings (When level 0 to 7 is selected)[Unlock Recorder] [Change Password][Change Level] [Temporary Unlock]Play DVD-Audio in Video ModeSelect “Video Mode (Video On)” to play DVD-Video content onsome DVD-Audio.[Video Mode (Video On)] [Audio Mode (Video Off)]Common proceduresEntering a password (Ratings)No DiscFUNCTIONS No DiscProgramCopyOther FunctionsENTERRETURN(1) (2) (3)ChannelSetupDiscVideoVHS ENTERAudioDisplayTV ScreenSetup Off TimerRemote Control CodeClock SettingsRestore Default Settings6 HoursSet Code 1Quick Start On(1) Menus(2) Items(3) OptionsSummary of settingsVideo Mode(Video ON)The setting returns to “Audio Mode (Video Off)”when you change the disc or turn the unit off.///