16RQTV0136STEP 3 Set up to match your TV and remote controlYou can enjoy progressive video by connecting the unit’s COMPONENTVIDEO OUT terminals to an LCD/plasma television or LCD projectorcompatible with progressive scan (l 62).[1] While stoppedPress [FUNCTIONS].[2] Press [3, 4] to select “To Others” and then press[ENTER].[3] Press [3, 4] to select “Setup” and then press[ENTER].[4] Press [3, 4] to select “Connection” and then press[2, 1].[5] Press [3, 4] to select “Progressive” and then press[ENTER].[6] Press [3, 4] to select “On” and then press[ENTER].Output becomes progressive.Notes≥When connected to a regular television (CRT: Cathode Ray Tube) or amulti system television using PAL mode, even if it is progressivecompatible, progressive output can cause some flickering.Turn off “Progressive” if this occurs (l 35).≥If the unit is connected to the television through VIDEO OUT or S VIDEOOUT terminal, output will be interlace irrespective of the settings.∫To return to the previous screenPress [RETURN].∫To exit the screenPress [RETURN] several times.≥If you have an LCD/plasma television or LCD projectorUsing progressive output, you can enjoy high-resolution video recorded onmedia such as DVD-Video. Connect this unit’s component video outputterminals to your television and turn on the progressive output setting(l 13).≥If you have a regular television (CRT: Cathode Ray Tube)Use component output with progressive “Off” (factory setting l 59), evenif the television is progressive compatible. Progressive output can causesome flickering. This is the same for multi system televisions using thePAL mode.To enjoy progressive videoRETURNENTERFUNCTIONSSTOPDRIVESELECT∫RETURNFUNCTIONS3, 4, 2, 1ENTERDRIVESELECT∫ Note to owners of progressive compatiblePAL system televisionsCOMPONENTVIDEO OUTCOMPONENTVIDEO INProgressive outputCOMPONENTVIDEO OUTCOMPONENTVIDEO INProgressive output