48RQTV0136Transfer (Copying)[RAM] [-RW‹VR›]You can transfer (copy) multiple titles and playlists that are recorded on adisc onto a video cassette.[1] Press [DRIVE SELECT] to select the DVD.[2] While both DVD and VHS are stoppedPress [FUNCTIONS].[3] Select “Copy” with [3, 4] and press [ENTER].[4] Set “Copy Direction”.≥Set “Source” to “DVD”.≥If you are not going to change the transfer (copy) direction, press[4], then skip to step 5.∫ To change the setting(1) Make sure “Copy Direction” is selected and press [1].(2) Make sure “Source” is selected and press [ENTER].(3) Press [3, 4] to select “DVD” andpress [ENTER].≥ When you set “Source” to“DVD”, “VHS” is automaticallyselected in “Destination”.(4) Press [2].(5) Press [4].[5] Set the recording mode.≥If you are not going to change therecording mode, press [4], then skipto step 6.∫ To Change the setting(1) Make sure “Copy Mode” is selected and press [1].(2) Make sure “Recording Mode” is selected and press [ENTER].(3) Select recording mode (SP, LP¢ or EP) with [3, 4] and press[ENTER].¢ Only when transferring (copying) in PAL(4) Press [2].(5) Press [4].[6] Register titles and playlists for transfer (copying).≥If you are going to transfer (copy) a registered list without making anychanges to it, press [4], then skip to step 7.∫ To set for the registration(1) Make sure “Create List” isselected and press [1].(2) Make sure “New item (Total = 0)”is selected and press [ENTER].(3) Press [A] to select “VIDEO” orpress [B] to select “Playlists”.≥ You can also select the view byselecting “Other View” from theSUB MENU.1 Press [SUB MENU].2 Make sure “Other View” isselected and press [ENTER]twice.(4) Press [3, 4, 2, 1] to select thetitle or playlist and press [ENTER].≥ You can register multiple titlesor playlists to the transferring(copying) list by repeating theabove steps (2) to (4).≥ To show other pages l below≥ Multiple editing l below≥ Transferring (copying) listdisplay and convenientfunctions l 49(5) Press [2].≥ Before pressing [2], make surethat the value on “Size” issmaller than the value in“Destination Remaining”.(6) Press [4].[7] When you finish creating thetransferring (copying) list,Make sure to select “StartCopying” and press[ENTER].≥The confirmation screen appears.[8] Select “Yes” with [2] andpress [ENTER].≥Transfer (copying) is started.∫ To stop transfer (copying) in the middlePress and hold [RETURN] for about 3 seconds or more.∫ GUI (Graphical User Interface)Transfer (copying) (DVD l VHS)Preparation≥Select the unit viewing channel (e.g. AV input) on the TV.DVD (Recording source)≥Insert the disc containing the programme to be copied. (l 17)≥[RAM] [-RW‹VR›] Select the audio to be played (the audio to berecorded) beforehand.VHS (Recording target)≥Insert a video cassette with a secure accidental erasure preventiontab. (l 17)≥Confirm that the remaining tape time is sufficient for recording. (l 33)Settings (l 59, TV System)≥When transferring (copying) an NTSC disc to a tape- Set “TV System” on “Connection” in Setup to “NTSC”.≥When transferring (copying) a PAL disc to a tape- Set “TV System” on “Connection” in Setup to “PAL”.RETURNA BENTERFUNCTIONSPLAYPAUSESTOPSKIP/SUB MENUDRIVESELECT3, 4, 2, 1ENTER∫SUB MENUARETURNBFUNCTIONS1:, 9;DRIVESELECTVarious operations∫To show other pagesPress [:, SKIP] or [9, SKIP].≥Press [3, 4, 2, 1] to select “Previous” or “Next” and press [ENTER]to show other pages.∫Multiple editingSelect with [3, 4, 2, 1] and press [;, PAUSE]. (Repeat this to selectmultiple items.)Press [ENTER] to register to the list.≥A check mark appears. Press [;, PAUSE] again to cancel.≥When you switch between the “VIDEO” and “Playlists” tab, the checkmark is cancelled.≥Titles or playlists are registered to the transferring (copying) list in theascending order of the title number.Registered titles