Panasonic Diga DMR-ES35V Operating Instructions Manual

Also see for Diga DMR-ES35V: Operating instructions Operating instructions Setup guide Setup guide Instrucciones de funcionamiento

Contents

2RQTV0136IMPORTANT SAFETY INSTRUCTIONS(Inside of product)CAUTION!THIS PRODUCT UTILIZES A LASER.USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OFPROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAYRESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.REFER SERVICING TO QUALIFIED PERSONNEL.WARNING:TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCTDAMAGE, DO NOT EXPOSE THIS APPARATUS TO RAIN,MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTSFILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ONTHE APPARATUS.CAUTION!≥DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISKOF ELECTRIC SHOCK OR FIRE HAZARD DUE TOOVERHEATING, ENSURE THAT CURTAINS AND ANY OTHERMATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.≥DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITHNEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILARITEMS.≥DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH ASLIGHTED CANDLES, ON THE UNIT.≥DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLYMANNER.[For]Australia]and]New]Zealand]THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.[For]Asia]and]the]Middle]East]THIS UNIT IS INTENDED FOR USE IN TROPICAL CLIMATES.This product may receive radio interference caused by mobiletelephones during use. If such interference is apparent, pleaseincrease separation between the product and the mobile telephone.The socket outlet shall be installed near the equipment and easilyaccessible or the mains plug or an appliance coupler shall remainreadily operable.Caution for AC Mains Lead(For Saudi Arabia)For your safety, please read the following text carefully.This appliance is supplied with a moulded three pin mains plug for yoursafety and convenience.A 5-ampere fuse is fitted in this plug.Should the fuse need to be replaced please ensure that thereplacement fuse has a rating of 5-ampere and that it is approved byASTA or BSI to BS1362.Check for the ASTA mark Ï or the BSI mark Ì on the body of the fuse.If the plug contains a removable fuse cover you must ensure that it isrefitted when the fuse is replaced.If you lose the fuse cover the plug must not be used until a replacementcover is obtained.A replacement fuse cover can be purchased from your local dealer.CAUTION!IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THESOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULDBE REMOVED AND THE PLUG CUT OFF AND DISPOSED OFSAFELY. THERE IS A DANGER OF SEVERE ELECTRICALSHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.If a new plug is to be fitted please observe the wiring code as statedbelow.If in any doubt please consult a qualified electrician.IMPORTANTThe wires in this mains lead are coloured in accordance with thefollowing code:Blue: Neutral, Brown: Live.As these colours may not correspond with the coloured markingsidentifying the terminals in your plug, proceed as follows:The wire which is coloured Blue must be connected to the terminalwhich is marked with the letter N or coloured Black or Blue.The wire which is coloured Brown must be connected to the terminalwhich is marked with the letter L or coloured Brown or Red.WARNING: DO NOT CONNECT EITHER WIRE TO THEEARTH TERMINAL WHICH IS MARKED WITH THELETTER E, BY THE EARTH SYMBOL Ó ORCOLOURED GREEN OR GREEN/YELLOW.THIS PLUG IS NOT WATERPROOF—KEEP DRY.Before useRemove the connector cover.How to replace the fuseThe location of the fuse differ according to the type of AC mainsplug (figures A and B). Confirm the AC mains plug fitted and followthe instructions below.Illustrations may differ from actual AC mains plug.1. Open the fuse cover with a screwdriver.2. Replace the fuse and close or attach the fuse cover.Getting started