Panasonic Diga DMR-EZ28EB Operating Instructions Manual

Contents

28RQT9118The timer icon is displayed in left column.NameNo.7/7/BBC101g“z” lights on the unit’s display to indicatetimer recording standby has been activated.Repeat steps – to programme otherrecordings.Press [8] to turn the unit off.––––Notes“z” on the unit’s display flashes when the unit cannot go to timerrecording standby. (e.g., a recordable disc is not in the disc tray).When timer recordings are set to start one immediately after another,the unit cannot record the beginning of the later programme.If two timer recording times overlap, the first recording always haspriority. The second recording will start only after the first recordinghas finished.Recorded subtitles cannot be deleted later.Timer Recording does not start while a disc is being formatted,deleted or finalised. The recording begins afterwards.When “Name” is set in AV1, AV2 or AV3, STTL setting is unavailable.TipsTo exit the timer recording listPress [PROG/CHECK].“Date” SettingEach press of [e] changes items in the order below.(Each press of [r] changes items in the reverse order.)Daily timerWeekly timerOne month laterminus one dayCurrent dateSAT------SUNSUN-SATMON-SATMON-FRIYou can also use the numbered buttons to enter “Name”, “Date”,“Start” and “Stop”.You can also press [REC MODE] to switch “Mode” and press[STTL ] to switch “STTL”.•••••••••To cancel a timer recording in progressWhile the unit is onConfirmation screen appears.–w to select “Stop Recording”,thenNotesRecording stops and the timer programme is deleted. (Daily andweekly timer programmes remain and timer recording will start fromthe next time the timer recording is set.)To deactivate timer programme(e.g. to interrupt a daily or weekly timerprogramming)See “ Timer Recording screen icons” (➔ 29)for explanation of icons displayed.–e, r to select the programme.(Red)“z” (➔ 29) disappears from the timerrecording list.Press the “Red” button again to activate timerprogramme.––TipsYou can deactivate the timer programme in the followingprocedure as well.Perform steps – (➔ above)1. Press [OPTION].2. Press [e, r] to select “Timer Off”, then press [OK].Advanced Timer Recording