Panasonic Diga DMR-EZ28EB Operating Instructions Manual

Contents

3RQT9118AccessoriesPlease check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.(Product numbers correct as of April 2008. These may be subject to change.)1 Remote control (N2QAYB000126) 1 AC mains lead (K2CT3CA00004)For use with this unit only. Do not use it withother equipment. Also, do not use cords forother equipment with this unit.•1 RF coaxial cable(K1TWACC00001)2 Batteries for remote control(R6 Size)1 Audio/video cable (➔ 59)(K2KA2BA00003)Sales and Support InformationCustomer Care CentreFor customers within the UK: 0844 844 3852For customers within the Republic of Ireland: 01 289 8333Visit our website for product informationE-mail: customer.care@panasonic.co.ukDirect Sales at Panasonic UKFor customers: 0844 844 3856Order accessory and consumable items for your product with easeand confidence by phoning our Customer Care Centre Monday-Thursday 9:00am-5:30pm, Friday 9:30am- 5:30pm (Excludingpublic holidays).••••••Or go on line through our Internet Accessory ordering applicationat www.panasonic.co.uk.Most major credit and debit cards accepted.All enquiries transactions and distribution facilities are provideddirectly by Panasonic UK Ltd.It couldn’t be simpler!Also available through our Internet is direct shopping for a widerange of finished products, take a browse on our website forfurther details.Interested in purchasing an extended guarantee?Please call 0870 240 6284 or visit our websitewww.panasonic.co.uk/guarantee.•••••Caution for AC Mains LeadFor your safety, please read the following text carefully.This appliance is supplied with a moulded three pin mains plug foryour safety and convenience.A 5-ampere fuse is fitted in this plug.Should the fuse need to be replaced please ensure that thereplacement fuse has a rating of 5-ampere and that it is approved byASTA or BSI to BS1362.Check for the ASTA mark or the BSI mark on the body of thefuse.If the plug contains a removable fuse cover you must ensure that it isrefitted when the fuse is replaced.If you lose the fuse cover the plug must not be used until areplacement cover is obtained.A replacement fuse cover can be purchased from your local dealer.CAUTION!IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THESOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULDBE REMOVED AND THE PLUG CUT OFF AND DISPOSED OFSAFELY.THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THECUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.If a new plug is to be fitted please observe the wiring code as statedbelow.If in any doubt please consult a qualified electrician.IMPORTANTThe wires in this mains lead are coloured in accordance with thefollowing code:Blue: Neutral, Brown: Live.As these colours may not correspond with the coloured markingsidentifying the terminals in your plug, proceed as follows:The wire which is coloured Blue must be connected to the terminalwhich is marked with the letter N or coloured Black or Blue.The wire which is coloured Brown must be connected to the terminalwhich is marked with the letter L or coloured Brown or Red.WARNING: DO NOT CONNECT EITHER WIRE TO THEEARTH TERMINAL WHICH IS MARKED WITH THELETTER E, BY THE EARTH SYMBOL OR COLOURED GREENOR GREEN/YELLOW.THIS PLUG IS NOT WATERPROOF—KEEP DRY.Before useRemove the connector cover.How to replace the fuseThe location of the fuse differ according to the type of AC mains plug(figures A and B). Confirm the AC mains plug fitted and follow theinstructions below.Illustrations may differ from actual AC mains plug.1. Open the fuse cover with a screwdriver.Figure A Figure B2. Replace the fuse and close or attach the fuse cover.Figure A Figure BFuse coverFuse(5 ampere)Fuse(5 ampere)