Panasonic Diga DMR-EZ45VEBS Operating Instructions Manual

Also see for Diga DMR-EZ45VEBS: Quick setup guide

Contents

DVD VHSAV3 S VIDEO IN VIDEO IN L/MONO AUDIO IN RAV3 S VIDEO IN VIDEO IN L/MONO AUDIO IN RS VIDEO-cableAudio cableL - WhiteR - RedAudio/Video cableVideo - YellowL - WhiteR - RedRAMRAMRAMSpecifying a time as the recording durationThis function is not available for Timer Recordings.! Press REC on the unit during recording.The recording time changes each time the button is pressed on the unit display:OFF 0:30 1:00 1:30 2:00 3:00 4:00 OFF! Press STOP . The recording is paused and the time setting is deleted.The unit switches itself off at the end of the recording if no functions are beingexecuted on another drive.Direct TV recordingIf your TV is equipped with Q Link, you can record a TV programme that you arecurrently watching. Other settings are not necessary. The recorder automaticallyswitches to the appropriate station.! Press DIRECT TV REC for 3 seconds. Recording begins.! Press STOP to stop the recording.DIRECT TV RECDVD: This function is not possible with Flexible Rec. If the channel or recordingmode (XP, SP, LP, EP) is changed while recording is paused, the time is deleted.VHS: If the tape speed is changed during the recording, a slight picture distortionwill occur at that point.DVD playback during recordingDuring the recording, you can the playback from the beginning of the programme.! Press PLAY during recording or Timer RecordingAt least 2 second must have elapsed since the beginning of the recording.Recording from an external unit, e.g. a camera! Connect the external unit to the AV3 input terminal on the front side of the unit.! Select one of the two connection options.The S VIDEO-cable and audio cable (L/R) connection delivers the best quality.Recording in dual-channel audioOn DVD-RAM, both channels of a programmein dual-channel sound are recorded.Use DISPLAY to switch between the tworecorded sound tracks.You cannot receive signals from PCs with this unit.Selecting the sound track to record for programmes with dual-channel soundRecording to VHS: Insert a video cassette with an intact write-protection tab.Recording to DVD: Insert a recordable disc.If you activated the write-protection, cancel it.Not! Select the VHS drive with DRIVE SELECT.! Select the DVD drive with DRIVE SELECT.! Select the recording mode with REC MODE.! In STOP-mode use INPUT SELECT to select input channel AV3.! Start playback on the external unit.! Press REC at the point where you want to start the recording.! Use STOP to stop the recording.! Select the recording mode with REC MODE.! In STOP mode, use INPUT SELECT to select input channel AV3.! Press PLAY .! At the point where you wish to start recording press PAUSE .! Press REC.! Start playback on the external unit.! Then press PAUSE to start the recording.! Use STOP to stop the recording.Analogue channels! Before recording, select Sound setting Bilingual Audio Selection [M1] or [M2] in theSetup menu.Select [M1] or [M2] on an external unit before recording.! If the output signal of the external unit is an NTSC signal, set the TV System to[NTSC] in the Setup menu.Recording32Digital channels! Press DISPLAY and select Audio setting [Multi Audio].