OPERATING INSTRUCTIONSMCUK011201C8 Section 3 Issue BService Manual – 3 – Revision 03 OPERATING INSTRUCTIONS3.1. GeneralThis section provides a brief guide to the operation and facilities available on the telephone handset. Refer to the OperatingInstructions supplied with the telephone for full operational information.3.2. Liquid Crystal DisplayThe telephone handset has a graphical chip on glass display. The following icons are available:Figure 3.1: Liquid Crystal DisplayFollowing some operations, the display will clear automatically after three seconds or after pressing any key except .Indicates received signal strength: strong signal area; weak signal area.Indicates that it is possible to make an emergency call.MenuNumberThe number of the feature indicated by the pointer. To access a feature enter the menu number on the keypad.Displays the battery charge level:Battery is at full chargeBattery requires chargingThe battery icon flashes during charging.Menu Icon Displays a small icon related to the current status of the telephone:telephone is roaming on a non-home network.using the “Call Divert” feature or the telephone has Call-Divert set;shows that vibration alert is switched on;shows that the telephone is in silent mode - no tones;flashes to indicate that there are unread text (SMS) messages. Lit when SMS area is full;indicates the telephone is locked;shows that the normal character set has been selected;shows that the Greek character set has been selected;shows that the Extended character set has been selected;shows that numbers have been selected for text entryT9 indicates that Tegic T9® predictive text mode is selected.InformationIconDisplays a small icon according to the current menu level:indicates the alarm is set.indicates the current Phonebook is sourced from the Mobile Phonebook.indicates the current Phonebook is sourced from the SIM Phonebook.Indicates that the navigation key ( ) can be pressed. Each arrow will light individually to indicate which direction is valid.Option Area Pressing the select key ( ) will select the option displayed in the option area of the display.E