Restricting CallsCall BarringThe Call Bar function is used to restrict certain outgoing and/or incoming calls. CallBar is controlled by a security password that is supplied by your Service Provider.When updating or checking the status of Call Bar the phone must be registered with anetwork. Different Call Bar restrictions can be used for voice, fax and data calls. Anycombination of call restrictions can be set.1 From Idle mode press B 82 to enter the Call Bar menu2 Use e to select Bar Voice, Bar Fax or Bar Data and press B3 Use e to the select level of call barring that you wish to apply and press B4 Enter Call Bar password and press BBarred DiallingThe Barred Dial function enables you to bar all phone numbers pre-programmed inthe SIM from being dialled on the phone. To use this function PIN2 is required.From Idle mode press B 86 and press B to enable Barred Dial , enterPIN2 and press BFixed DialThe Fixed Dial Store is part of Phonebook, but with additional security. When thesecurity feature Fixed Dial is enabled it is only possible to make calls with phonenumbers that are in the Fixed Dial Store.When Fixed Dial is enabled any manually dialled phone numbers must match aphone number in the Fixed Dial Store.To store, edit or delete a phone number in the Fixed Dial Store the Fixed Dialfunction must be enabled. With Fixed Dial enabled, all phone numbers can beadded, edited or deleted as normal, but you will be prompted for PIN2.“Wild” NumbersWild numbers are spaces that can be stored in a phone number. The “wild” numbersmust be filled before the phone number is dialled. Used in conjunction with Fixed Dialcalls can be restricted, for example, to a specific area by storing the area code of aphone and when recalled the remainder can be added. The “wild” numbers can beanywhere within a stored phone number.1 Press and hold 0 until _ is displayed to enter a wildnumber2 When the phone number is recalled pressing a numerickey will fill in a “wild” number.19Phone SecurityMenu+0123_56_