Panasonic EB-GD92 Series Operating Instructions Manual

Also see for EB-GD92 Series: Service manual Service manual

Contents

Panasonic EB-GD92 Series Operating Instructions Manual Manual pdf 25 page image

Setting the AlarmIf you have not already set the clock, you will be prompted to do so prior to setting thealarm.There are four separate alarms, each of which may be set independently.1 From Idle mode press B 413 to enter theAlarm Set menu and press B2 Use e to select the alarm to be set and press B3 Enter the digits for the time and press B4 Use e to select the frequency of the alarm and pressB5 Use e to select the ring type and press BOnce the alarm has been set, ? will be displayed in the information area when thephone is in Idle mode.The alarm is activated in accordance with the current clock (Home or Visitor)Muting the AlarmWhen the set time is reached the alarm will sound and the display will flash with analarm message. The alarm will sound for 30 seconds. If the alarm is due during a call,it will activate vibration alert.To end the alarm:Press any keyDisabling the Alarm1 From Idle mode press B 413 to enter the Alarm Set menu andpress B2 Use e to select the alarm to be disabled and press B twice3 Use e until Disabled is displayed and press BOnce disabled, following the same procedure will re-enable the alarm.Adjusting the Alarm Time1 From Idle mode press B 413 to enter the Alarm Set menu andpress B2 Use e to select the alarm to be adjusted and press B3 Press and hold C to remove the current alarm time4 Enter the digits for the time and press B5 Press e to select the frequency of the alarm and press B6 Use e to select the ring type and press B21ApplicationsOkRepeat DailyAlarm: