Panasonic EB-GD92 Series Operating Instructions Manual

Also see for EB-GD92 Series: Service manual Service manual

Contents

Panasonic EB-GD92 Series Operating Instructions Manual Manual pdf 34 page image

Call ChargesTo maintain control over the cost of calls that are made, the phone can be set torestrict use to a finite number of units overall.Setting the Unit PriceFirstly, a price per unit must be entered. This is the cost that the Service Providercharges for one unit of call time.1 From Idle mode press B 662 to enter the Price/Unit menu2 Press B to edit the valuesAt this point you will be asked to enter your PIN2.3 Enter a currency unit (up to three characters) and press B4 Enter a price and press BSetting the Maximum Unit Level1 From Idle mode press B 663 to enter the Max Cost menu2 Press B to edit the valuesAt this point you will be asked to enter your PIN2.3 Enter a value (number of units) which is to be the maximum permitted, and thecorresponding cost will be displayed4 Press B to acceptNote: The duration of one unit may vary during the day, peak and off-peak times.Therefore, the call charge can be calculated accordingly. However, call chargeinformation may not give an accurate reflection of the tariffs charged by your ServiceProvider.Setting a Warning LevelA warning can be set as an indication that the maximum cost is about to be reached.1 From Idle mode press B 664 to enter the Warning at menu2 Press B to edit the value3 Enter a value (in units) at which time you would like the warning to sound andpress BCall IdentificationIn the Call Service menu, the Caller’s ID and Withhold ID functions allow you tocheck the status of whether a Caller’s Identification is sent or can be received.Note: When checking the status the phone must be registered with a network.30Call Information