4-54.4 Allocation of FP0 Expansion UnitThe FP0 expansion unit is installed on the right side of the FPΣ control unit.The I/O numbers start with the lowest number at the expansion unit nearest the control unit and proceedin sequential order.4.4.1 I/O Numbers of FP0 Expansion Unit• I/O do not need to be set as I/O allocation is performed automatically when an expansion unit is added.• The I/O allocation of expansion unit is determined by the installation location.Type of unit Number ofallocationExpansionunit 1Expansionunit 2Expansionunit 3FP0-E8X Input (8 points) X20 to X27 X40 to X47 X60 to X67Input (4 points) X20 to X23 X40 to X43 X60 to X63FP0-E8R Output (4 points) Y20 to Y23 Y40 to Y43 Y60 to Y63FP0-E8TY/PFP0-E8YR Output (8 points) Y20 to Y27 Y40 to Y47 Y60 to Y67FP0-E16X Input (16 points) X20 to X2F X40 to X4F X60 to X6FInput (8 points) X20 to X27 X40 to X47 X60 to X67FP0-E16RFP0-E16T/P Output (8 points) Y20 to Y27 Y40 to Y47 Y60 to Y67FP0-E16YT/P Output (16 points) Y20 to Y2F Y40 to Y4F Y60 to Y6FInput (16 points) X20 to X2F X40 to X4F Y60 to Y6FFP0ExpansionunitEP0-E32T/P Output (16 points) Y20 to Y2F Y40 to Y4F Y60 to Y6FInput (16 points)CH0WX2(X20 to X2F)WX4(X40 to X4F)WX6(X60 to X6F)Input (16 points)CH1WX3(X30 to X3F)WX5(X50 to X5F)WX7(X70 to X7F)FP0AnalogI/O unitFP0-A21Output (16 points) WY2(Y20 to Y2F)WY4(Y40 to Y4F)WY6(Y60 to Y6F)Input (16 points)CH0, 2, 4, 6WX2(X20 to X2F)WX4(X40 to X4F)WX6(X60 to X6F)FP0 A/Dconversion unitFP0thermocoupleunitFP0-A80FP0-TC4FP0-TC8 Input (16 points)CH1, 3, 5, 7WX3(X30 to X3F)WX5(X50 to X5F)WX7(X70 to X7F)Input (16 points) WX2(X20 to X2F)WX4(X40 to X4F)WX6(X60 to X6F)Output (16 points)CH0, 2, 4, 6WY2(Y20 to Y2F)WY4(Y40 to Y4F)WY6(Y60 to Y6F)FP0 D/AconversionunitFP0-A04VFP0-A04IOutput (16 points)CH1, 3, 5, 7WY3(Y30 to Y3F)WY5(Y50 to Y5F)WY7Y70 to Y7F)Input 32 points X20 to X3F X40 to X5F X60 to X7FFP0I/O link unit FP0-IOL Output 32 points Y20 to Y3F Y40 to Y5F Y60 to Y7F• The data for the each channels of FP0 A/D conversion unit (FP0-A80), FP0 thermocouple unit (FP0-TC4/FP0-TC8) and FP0 D/A conversion unit (FP0-A04V/FP0-A04I) is converted and loaded with a userprogram that includes a switching flag to convert the data.• Regarding FP0 CC-Link slave unit, please refer to the exclusive manual.
