FTP client and SD memory card control setupFP Web-Server V2.810 EN 53download) via the Ethernet<->RS232C/RS485/USB ports, the e-mailpolling of the PLC internal flag is delayed.A) Using an FTP server via Ethernet LAN:Please ask your network administrator whether the followingrequirements are met: An FTP server in the LAN is required. Refer also to the informationabout setup of an individual Ethernet LAN (see p. 181). The address of the FTP server has to be stated correctly in the FP WebConfigurator project. An account of the FTP server must be known for the connection.B) Dialing up an FTP server in the Internet: A modem is needed to dial up an ISP. An account of the FTP server must be known for the connection. To set up the dial-up function, the e-mail function is needed. Pleaserefer to Internet e-mail settings (see p. 146).7.2 Operation modes for FTP client and SD card storageIt is possible to generate a file with PLC data with a syntax similar to thee-mail attachment to send via FTP or to store on the SD card of the FP WebExpansion unit (see p. 29). The PLC can send data as a user-defined text(TXT) or in a Microsoft Excel compatible file format (CSV). The PLC dataregister range and the file name can be defined in a special tag. This tag isplaced as a string in the PLC and is read after recognizing the operationstart.The maximum number of characters for the command tag (including thebrackets) is 128.The format of the special tag for a CSV attachment is:{A_D_00200_00066_S04_filename.csv}For a text attachment, it is:{A_D_00200_00001_T01_filename.txt}E x a m p l e
