Logging/TraceStart, Stop and Monitor3-23.1 Start and Stop of Logging/Trace Operation3.1.1 Start and Stop by Tool Software OverviewThe logging/trace operation can be started and stopped by the tool software.PROCEDURE1. Select “Tool” > “Logging/Trace Monitor” in the menu bar.The “Logging/Trace Monitor” dialog box appears.2. Check the box of a desired LOG number, and press the [Start] button.A confirmation message appears.3. Press the [Yes] button.Starting the logging operation is requested by the operation specified in the“Logging/Trace Settings” dialog box. System relays relating to the execution oflogging/trace can be monitored in the above dialog box. Once the operation isstarted normally, the "Logging/Trace is being executed" and "SD logging is beingexecuted" flags turn on.4. For stopping the logging/trace operation, check the box of a desired LOGnumber and press the [Stop] button.Stopping the logging/trace operation is requested. Once the logging/traceoperation ends normally, the "Logging/trace is complete" flag turns on.
