Panasonic FP0H User Manual
Also see for FP0H Series: User manualUser manualUser manualQuick start guideOperation manual
                                                                               | |
Contents
| 
6.2 Troubleshooting6-56.2.2 Errors When Operation was Executed Using LOGST, LOGED orLOGSMPL InstructionThis section describes the situations and countermeasures when logging operation starts orstops, or logging trigger operation is performed with instructions in user programs. List of errorsSituation orError message Situation CountermeasuresERR/ALM LED Flashes A self-diagnostic error such as anoperation error occurs.Wen an operation error occurs in theaddress of LOGST, LOGED, or LOGSMPLinstruction, check the followings.An operation erroroccurred in the address ofLOGST or LOGEDinstruction.The instruction might have beenexecuted for an unregistered LOGnumber.Check if the settings match the LOGnumber for which the instruction isexecuted.There is a possibility that no SDmemory card is inserted, or thebattery cover is open.Check if an SD memory card is inserted,and close the battery cover.An operation erroroccurred in the address ofLOGSMPL instruction.The instruction was executed forthe LOG number the logging triggerof which is not set to “Instruction”.Check if the settings of logging triggermatch the LOG number for which theinstruction is executed.Logging/Trace operationis not executed withLOGSMPL instruction.There is a possibility that the LOGnumber does not match.Check if the settings match the LOGnumber for which the instruction isexecuted.6.2.3 Error of Logging/TraceOther assumed situation and countermeasure are as follows. List of errorsSituation orError message Situation CountermeasuresLogging/trace starts or iscomplete right after theexecution.Autostart might be set. Set Autostart to “No” in the loggign/tracesetting menu.6.2.4 Error When Copying Data in SD Memory CardOther assumed situation and countermeasure are as follows. List of errorsError message Situation Countermeasures43 From PLC：Copy failed.Data in an SD memory card cannotbe copied into the control unit.Create an “AUTO” folder in the SD memorycard.Check if the setting file is saved in the SDmemory card. |
Related manuals for Panasonic FP0H Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine