Trace Operation and Time Chart5-85.3.2 Explanation of Time Chart MonitorThe time chart window is composed of the following parts. Names and Functions of PartsCode Name FunctionA-1 Device ListDisplays all the devices registered in the target LOG for the time chartdisplay.- Select the device to be displayed in graphs from this list.- Data corresponding to the range specified by the scroll bar at thebottom of the graph display area is displayed.- By double-clicking a line in the device list, registering and editingdevices can be performed.A-2 Trace Monitor -The execution state of the race operation is monitored in this area.- The contents of occurred errors can be confirmed.B-1 Graph display area- Trace data is displayed as line graphs in chronological order. (Theon/off state of contacts is displayed with rectangular wave form.)- The vertical line with a [T] mark is displayed at the point where a triggeroccurs.B-2 Time scale display areaDisplays the time between arbitrary two points of B-1 or the time betweenthe point whee a trigger occurs and an arbitrary point.However, time is not displayed when the selected trigger type is otherthan "cycle".KEY POINTS• The time scale display area is available only when the logging trigger is"Cycle". This area is not displayed when the logging trigger is “Bit” or“Instruction”.C-1C-2A-1A-2B-2B-1
