11-2511.10.3 Reading E-mail logs- Contents of the send log block- Send log blocks can be registered in the e-mail send log area.- A newer e-mail send log is continuously registered in the starting send log block. When the number ofthe send log block exceeds 32, the older log that is stored in the e-mail send log area’s last block isoverwritten.Send log blocks (Bank:11H Address:0000H-01FFH)Offset address Name Description0 (L) Date (Min.)Date and time when e-mail is sent.0 (H) Date (Time)1 (L) Date (Day)1 (H) Date (Month)2 Send e-mailidentification No.The send e-mail message No.3 Reserved Reserved (Used in the system.)4Specifying “To”(Higher 16 bits)Nos. 1－16 E-mail address No. set for “To” is stored using the bit data.5Specifying “To”(Lower 16 bits)Nos. 17－326Specifying “Cc”(Higher 16 bits)Nos. 1－16 E-mail address No. set for “Cc” is stored using the bit data.7Specifying “Cc”(Lower 16 bits)Nos. 17－328Specifying “Bcc”(Higher 16 bits)Nos. 1－16 E-mail address No. set for “Bcc” is stored using the bit data.9Specifying “Bcc”(Lower 16 bits)Nos. 17－32A-F Reserved Reserved (Used in the system.)- Contents of the receive log block- Receive log blocks can be registered in the e-mail receive log area.- A newer e-mail receive log is continuously registered in the starting receive log block. When thenumber of the receive log block exceeds 32, the older log that is stored in the e-mail receive logarea’s last block is overwritten.Receive log blocks (Bank:11H Address:0200H-03FFH)Offset address Name Description0 (L) Date (Min.)Date and time when e-mail is received.0 (H) Date(Time)1 (L) Date (Day)1 (H) Date (Month)2-E From Note1 E-mail source address (ASCII 26 characters) of the receivede-mail.F Error codeNote:1. When the e-mail source address is indicated in more than 27 characters, the characters later than the27 th character are omitted.
