Wiring3-23.1 Wiring of Terminal Block Suitable solderless terminals/wiresM3 terminal screws are used for the terminal. The following suitable solderless terminals arerecommended for the wiring to the terminals Suitable solderless terminalsManufacturer Shape Part no. Suitable wiresRound type 1.25-MS3Fork type 1.25-B3A0.25 to 1.65 mm 2Round type 2-MS3J.S.T. Mfg Co., Ltd.Fork type 2-N3A1.04 to 2.63 mm 2 Suitable wiresSuitable wires Tightening torqueAWG22 to 14 (0.3 mm 2 to 2.0 mm 2) 0.5 to 0.6 N·m Connection to the terminal blockRemove the terminal block before beginning the wiring operations. To remove the terminalblock, push downward the release lever located at the top of the terminal block.Lock buttonNOTE• Install the terminal block by inserting it all the way to its original positionand pressing the lock button on the bottom of the unit. Then confirm thatthe terminal block is securely attached and cannot be removed.
