Unit Settings andData Writing4-44.2 Configuration Settings4.2.1 Configuration of Analog Output UnitUse the FPWIN GR7 configuration menu to make analog output unit settings, such as outputrange, offset, and gain settings. Setting methodThe following steps are described on the condition that the analog output unit has beenalready allocated on the I/O map.PROCEDURE1. Select “Options” → “FP7 Configuration” from the menu bar.2. Select “I/O Map” from the field.3. Select the slot where the analog output unit is registered and press the [Setdetails] button.The “Analog unit settings” dialog box is displayed.4. Select the output processing and range setting.Select option setting as required.5. Press the [OK] button.The set value will become effective when the set value is downloaded togetherwith a corresponding program as a project.
