Mail Transmission Function6-126.3.2.1 Destination Server Setting (SMTPcSV)• Sets the information of the connected mail send server and the sender.• CY (SR9) and SD29 are cleared to 0 when this instruction is executed. (They are set whenIP address is not established or Ethernet is initialized.)• Confirm if "X61: Ethernet initialization active" is OFF before executing the instruction.• For details of the setting to use the add-on, refer to 4.4.2 Setting with Instructions of the FTPclient function. Instruction format“initial”S3R0SMTPcSV “name=fp7,from=abc@xxx.com,IPv4=192.168.1.1” “cram,account=abc,pass=xxx”S1 S2X61 Operation unit (i)• There is no operation unit. List of operandsOperand DescriptionS1 Specify the starting address storing the info of sender & mail send server or a character constant.S2 Specify the starting address storing the authentication setting parameter or a character constant.S3 Specify the starting address storing the detailed setting parameter or a character constant. Available Devices (●: Available)Operand16-bit device 32-bitdevice IntegerRealnum-berString IndexmodifierWX WY WR WL WS SD DT LD UM WI WO TSCSTECE IX K U H SF DF " "S1 ● ● ● ● ● ● ●S2 ● ● ● ● ● ● ●S3 ● ● ● ● ● ● ●
