Panasonic GT703 User Manual

Also see for GT series: User manual Manual User manual Connection manual Operation guide

Contents

Before You Startvii Touch switches• Always operate the touch switches with fingers. As the touch switches may be damageddue to the excessive load or shock (caused when being operated with any tools), the touchswitches should be operated within the specified control force. Also, if the touch switchesare pressed like kneading, the electrode may be worn out exceptionally, and cause themalfunction. Operate with a single touch of a switch.• The touch position may shift due to aging variation. If the touch position has shifted, pleaseadjust it. LCD panel• Do not drop or have a strong impact on the programmable display unit as glass is used forthe LCD panel.• The liquid in the LCD panel is a hazardous substance. If the LCD panel is broken, do notput the leaked crystalline liquid into your mouse. Should it get into your mouse, immediatelygargle, and consult a doctor. If it adheres to your skin or clothes, wash it away with soap.• On the LCD panel, bright spots ( points always lit) or black spots (points always unlit) mayappear, or the uneven brightness, flickers or crosstalk (appearance of unintended shades inthe area no graphic or part is arranged) may occur depending on the operating conditions.Note that these phenomena are resulted from the basic characteristics of LCD panel notdefects or failures of the product. BatteryDo not leave the battery in the unit when it is not used. There is a possibility of leak if it is leftbeing discharged. Scratch protection sheetA sheet is affixed to the touch panel to protect it from scratches when shipping. Pleaseremove it before using the GT. SD memory card• The data saved in the SD memory card may be lost in the following cases. We assume noresponsibility whatsoever for the lost of saved data.When a user or third party used the SD memory card incorrectly.When the SD memory card was affected by any static electricity or electrical noise.When the SD memory card was removed or the power supply of the GT unit was turned offwhile data was being read, written or deleted to/from the SD memory card.• It is recommended to save important data in another media for backup.