Panasonic GT703 User Manual

Also see for GT series: User manual Manual User manual Connection manual Operation guide

Contents

Specifications6-26.1 GT703 Specifications6.1.1 General SpecificationsItem Specifications24 V DC type 5V DC typeRated voltage 24 V DC 5 V DCOperating voltagerange 21.6 to 26.4 V DC 4.5 to 5.5 V DCPower consumption 2.4 W or less (100 mA or less). 2W or less (400 mA or less). (Note 1)Operating ambienttemperature 0 to +50 °COperating ambienthumidity 20 to 85% RH (at 25?), non-condensingStorage ambienttemperature -20 to +60 °CStorage ambienthumidity 10 to 85% RH (at 25 °C), non-condensingBreakdown voltage Between [power supply terminals] and [case]500 V AC for 1 minute, Cutoff current: 10 mA (at default setting)Insulation resistance Between [power supply terminals] and [case]100 MΩ or more, 500 V DC, measured with megohmmeter (at default setting)Vibration resistanceConforms to IEC61131-2.5 to 8.4 Hz, 3.5-mm single amplitude8.4 to 150 Hz, Acceleration 9.8 m/s 210 sweeps each in X, Y and Z directions (1 octave/min)Shock resistance Conforms to JISB3502 and IEC61131-2.147m/s 2 or more, 3 times in the X, Y, Z directionsEU Directiveapplicable standard EN61131-2 (EMC Directive)Noise resistance 1,000 V [P-P], Pulse width 50 ns, 1 μs between power supply terminals (based on in-house measurements) (Note 2)Electrostaticdischarge resistance 4 kV (Contact discharge)ProtectiveconstructionIP67 (Initial value, evaluated by us)Dustproof and waterproof from front panel only (packing used on panel contact surface)(Note 3)Weight (main unit) Approx. 180 g(Note 1): The power cannot be supplied from the tool port of a PLC (CPU unit).(Note 2): When using our exclusive cable.(Note 3): When installing the unit again, replace the water-proof packing.