46VQT4C38This is for reducing the wind noise coming into the built-in microphones.≥ Switch to Manual Mode. (l 48)≥ This function’s default setting is [OFF].≥ When switching to Intelligent Auto Mode, [WIND CUT] is set to [OFF], and the settingcannot be changed.≥ You may not see the full effect depending on the recording conditions.When recording, the input level from the built-in microphones can be adjusted.≥ Switch to Manual Mode. (l 48)1 Select the menu.2 (When [SETr ]/[SET] is selected)Press 2/1 to adjust.≥ Adjust the microphone input level so that thelast 2 bars of the gain value are not red.(Otherwise, the sound is distorted.) Select alower setting for microphone input level.3 Press the ENTER button to determinethe microphone input level and thenpress the MENU button.≥ (Microphone input level meter)appears on the screen.≥ In Intelligent Auto Mode this setting is set to [AUTO] and cannot be changed.≥ The microphone input level meter shows the larger of the inputs from the 2 built-inmicrophones.≥ You cannot record with the audio completely muted.[WIND CUT]: [RECORD SETUP] # [WIND CUT] # [ON][MIC LEVEL]: [RECORD SETUP] # [MIC LEVEL] # desired setting[AUTO]: AGC is activated, and the recording level is adjustedautomatically.[SETr ]: The desired recording level can be set.AGC is activated, reducing noise.[SET]: The desired recording level can be set.You will be able to record natural-sounding audio.A LeftB RightC Microphone input level
