103VQT3Y41Connecting with a HDMI mini cableSelect the desired method of HDMI output.≥ [AUTO] determines the output resolution automatically based on information from theconnected TV.If the images are not output on the TV when the setting is [AUTO], switch to the method[1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Pleaseread the operating instructions for the TV.)≥ Image will not display on TV for a few seconds in the following cases.j When the 1080/60p recording mode is turned on/off during Motion Picture RecordingModej When you touch the play mode select icon to select [1080/60p], and then touch [ENTER]during Playback Mode.j When the play mode selection is set to in the Playback Mode, and it is switchedbetween the 3D still picture and the 2D still picture.j When the 1080/60p, 1080/60i, or side-by-side scenes are switched.Connecting with the AV multi cableSelect the desired setting of AV multi connector output.Changing the component output setting≥ Set [VIDEO LIGHT] to [OFF] when recording with the TV connected to the componentterminal to confirm the recording. (l 60): [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]: [SETUP] # [AV MULTI] # desired setting[COMPONENT]: When connecting to the component terminal[AV OUT]: When connecting to the video terminal: [SETUP] # [COMPONENT OUT] # desired setting[1080i]: When connecting to the component terminal on the TV compatible with1080i.(Playback is in high definition quality.)[480i]: When connecting to the component terminal on the TV compatible with 480i.(Playback is in standard quality.)MENUMENUMENU