122VQT3Y41∫ Dubbing using equipment without an SD card slot or a USB terminal,or using a video deviceYou can dub by connecting an AV multi cable.≥ Images are dubbed in standard quality.≥ Use the AC adaptor to free you from worrying about the battery running down.≥ Change the mode to .1 Connect this unit to a video device and start playback on this unit.2 Start recording on the connected device.≥ To stop recording (dubbing), stop playback on this unit after stopping recording on therecorder.≥ If the date and time display and function indication are not wanted, cancel them beforedubbing. (l 42, 102)≥ For setting when connecting the AV multi cable, refer to page 103.Dubbing in standard picture qualityChange the video input on thevideo device and TV that thisunit is connected to.≥ The channel set will differ dependingon the terminal to which the unit isconnected.≥ See the operating instructions of thevideo device for details.≥ Insert the plugs as far as they will go.≥ Do not use any other AV multi cablesexcept the supplied one.A AV multi cable (supplied)If the dubbed images are played back on a wide-screen TV, the images may be stretchedvertically.In this case, refer to the operating instruction for the device you are connecting to or readthe operating instructions of the wide-screen TV and set the aspect ratio to 16:9.AV MULTI
