153VQT3Y41When disposing of or giving away the SDcard, note that:≥ Formatting and deletion of this unit orcomputer only changes the filemanagement information and does notcompletely delete the data in the SD card.≥ It is recommended that the SD card isphysically destroyed or the SD card isphysically formatted using this unit whendisposing of or giving away the SD card.To physically format the SD card, connectthe unit via the AC adaptor, select[SETUP] # [FORMAT CARD] # [YES]from the menu, and then press and holdthe recording start/stop button on thescreen below for about 3 seconds. Whenthe SD card data deletion screen appears,select [YES], and then follow the on-screen instructions.To physically format the SD card, connectthe unit via the AC adaptor, select[SETUP] #[FORMAT MEDIA] # [SDCARD] from the menu, and then pressand hold the recording start/stop button onthe screen below for about 3 seconds.When the SD card data deletion screenappears, select [YES], and then follow theon-screen instructions.≥ The customer is responsible for themanagement of the data in the SD card.≥ When the LCD monitor gets dirty, wipe itwith a soft cloth such as eye glass cleaner.≥ Do not touch the LCD monitor with yourfinger nails, or rub or press with strongforce.≥ It may become hard to see or hard torecognize the touch when the LCDprotection sheet is affixed.≥ In a place with drastic temperaturechanges, condensation may form on theLCD monitor. Wipe it with a soft cloth suchas eye glass cleaner.≥ When the unit has become very cold, forexample due to storage in a cold area, itsLCD monitor will be slightly darker thanusual immediately after the unit is turnedon. The normal brightness will be restoredwhen the unit’s internal temperature rises.About the SD cardHC-V700HC-V700MLCD monitorExtremely high precision technology isemployed to produce the LCD Monitorscreen featuring a total of approximately460,000 dots. The result is more than99.99% effective dots with a mere 0.01%of the dots inactive or always lit.However, this is not a malfunction anddoes not affect the recorded picture.
