- 117 -∫ Dubbing using equipment without an SD card slot or a USB terminal,or using a video deviceYou can dub by connecting a Composite video cable (commercially-available).≥ Use the AC adaptor to free you from worrying about the battery running down.≥ Change the mode to .1 Connect this unit to a video device and start playback on this unit.2 Start recording on the connected device.≥ To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.≥ If the date and time display and function indication are not wanted, cancel them before dubbing.(l 32, 101)Dubbing in standard picture qualityChange the video input on thevideo device and TV that thisunit is connected to.≥ The channel set will differ depending onthe terminal to which the unit isconnected.≥ See the operating instructions of thevideo device for details.≥ Insert the plugs as far as they will go.A Composite video cable (commercially-available)If the dubbed images are played back on a wide-screen TV, the images may be stretchedvertically.In this case, refer to the operating instruction for the device you are connecting to or read theoperating instructions of the wide-screen TV and set the aspect ratio to 16:9.A/V
