- 165 -≥ Connect this unit to the PC after the software applications are installed.≥ Remove the supplied CD-ROM from your PC.A USB cable (supplied)≥ Insert the plugs as far as they will go.1 Connect this unit to the AC adaptor.≥ Use the AC adaptor to free you from worrying about the battery running down.≥ Connect with the AC adaptor when using the Conversion Assist Function.2 Turn on the unit.3 Connect this unit to a PC.≥ The USB function selection screen will appear.4 Touch [PC] on the screen of this unit.≥ The Smart Wizard Screen is automatically displayed when HD Writer AE 5.0 is installed.≥ This unit is automatically recognized as an external drive of the PC. (l 167)≥ When you select an option other than [PC], reconnect the USB cable.≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen to turnthe LCD monitor on.≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with anyother USB cables.)≥ When this unit is connected to a PC using a USB cable while the unit is turned on, power is alsosupplied from the PC to this unit.≥ When performing reading/writing between a PC and an SD card, be aware that some SD cardslots built into PCs and some SD card readers are not compatible with the SDHC Memory Card orSDXC Memory Card.≥ When using an SDXC Memory Card, check the following support site.http://panasonic.net/avc/sdcard/information/SDXC.htmlWith a PCConnecting to a PC
