- 54 -It is possible to set the focus and exposure to the subject specified on the touch screen.The focus and exposure will keep following the subject automatically even if it moves.1 Touch .≥ When [FACE RECOG.] (l 64) is [ON] and a registered face is detected, the target isautomatically locked.2 Touch the object and lock the target.≥ When you touch the head of the object, the target frame onthe head gets locked and tracking starts.≥ Touch the object to be changed again when you want tochange the target.≥ When the Intelligent Auto Mode or Intelligent Auto Plus Modeis selected, the setting becomes / (Normal) andtouched object is tracked. Selection becomes /(Portrait) when target frame is locked on a face. (It may turn to/ (Normal) even if the target is locked on the facewhen a spotlight is shining or with a dark scene.)3 Start recording.∫ About target frame≥ When target lock fails, the target frame blinks in red and then disappears. Touch a characteristicpart (color etc.) on the object to lock onto it again.≥ When the button is pressed halfway in Still Picture Recording Mode, the focus is set to theobject that is locked. The target frame turns green when it focuses, and the target cannot bechanged.≥ This function cannot be used in Manual Mode. In Still Picture Recording Mode, it can only beused with some settings in Scene Mode.≥ It may track different objects or may not lock the target depending on the recording conditionssuch as the following:j When the object is too large or too smallj When color of the object is similar to the backgroundj When the scene is dark≥ When the target is locked in Still Picture Recording Mode, the screen may become dark or the AFassist lamp may be performed. (l 77)≥ AF/AE tracking will be canceled in the following cases.j When the mode is changedj When the unit is turned offj Touch the Recording Mode button iconj Switch to recording of yourselfAF/AE trackingA Target frame
